Devine Musical Instruments Recording Bundle

microphone accessories	microphone clip, windshield, bag / box
Minimum frequency	30 - 34 Hz
pad switch	no
polar pattern	cardioid
stereo	no
interchangable capsules	no

Devine Musical Instruments Recording Bundle
Product no: 9000-0063-0971 Bax Music Warranty: Devine SM-100 Instrument Condenser Microphone This product comes with a 3-year warranty. Innox IVA MBAR 2 Dual Microphone Mount This product comes with a 3-year warranty. Innox IVA 12 Microphone Stand (Black) This product comes with a manufacturing defects warranty. Devine MIC100/5 XLR Microphone/Signal Cable, 5m This product comes with a manufacturing defects warranty. Devine Centro 2i2o Audio Interface This product comes with a 3-year warranty.

General

Since most acoustic instruments aren't equipped with line inputs and can't simply be hooked up to a laptop, we're often asked how something like a classical guitar, clarinet or violin can be recorded. The answer comes down to good old microphones and a decent computer or laptop. While we don't sell the latter, we do sell everything else needed to record music and offer ambitious musicians this handy, Devine-based Musical Instruments Recording Bundle including two small diaphragm condenser microphones; a matching mic stand; microphone signal cables; a USB audio interface that takes the audio from the microphones and sends it to your computer; and even a copy of Bitwig's 8-Track DAW software so you can save or edit your recordings. So, if you've been thinking about getting creative with your musical instrument, this highly complete and affordable pack is a great place to start.

Tips or comments about this product

Also read our blog containing articles on sound recording.

Specifications

2x Devine SM-100 Instrument Condenser Microphone
The Devine SM-100 condenser instrument microphone is ideal for recording acoustic instruments such as guitars and pianos, but can also be used as an overhead. It comes with a microphone clip, a windscreen and a pouch.

Product features

Sustainable product	not specified
Microphone sensitivity (dBV/PA)	-38
Microphone impedance	100-149 ohms
Low-cut filter	no
Maximum SPL	130 dB - 139 dB
Maximum frequency	18 - 18.9 kHz
Microphone accessories	microphone clip, windshield, bag / box
Minimum frequency	30 - 34 Hz
Pad switch	no
Polar pattern	cardioid
Stereo	no
Interchangable capsules	no

Weight and dimensions including packaging

Weight (incl. packaging)	600 gr
Dimensions (incl. packaging)	20,5 x 10,0 x 7,5 cm

Product specifications

condenser instrument microphone
suited for the recording of acoustic instruments, overhead applications, etc.
pickup pattern: cardioid
frequency range: 30Hz - 18kHz
sensitivity: -38dB (+/-3dB), 0dB = 1V/Pa at 1kHz
output impedance: : 100 Ohm (+/- 30%) at 1kHz
self-noise: 24dBA
maximum sound pressure: 135dB (at 1kHz <1% THD)
S/N ratio: 70dB
phantom power supply: 9 - 52V
includes microphone clip, windscreen and carrying pouch

1x Innox IVA MBAR 2 Dual Microphone Mount
The Innox IVA MBAR-2 is simply secured to any standard 5/8-inch screw-threaded microphone stand, so that two microphones with a 5/8-inch screw-thread can be mounted for a dual-mic set-up.

Product features

Sustainable product	not specified
Holder / clamp for specific model	no
Screw thread size	5/8 inch
Type of mic holder, clip or clamp	T-bar/stereo bar

Weight and dimensions including packaging

Weight (incl. packaging)	300 gr
Dimensions (incl. packaging)	20,5 x 4,0 x 3,5 cm

Product specifications

dimensions: 20 x 3cm
adapter: 1x 5/8" female to 2x 5/8"male
contents:
- 1x Innox IVA MBAR 2 adapter

1x Innox IVA 12 Microphone Stand (Black)
The Innox IVA 12 is a solid, pro-grade microphone stand equipped with a large, ergonomic tightening knob that allows you to adjust the height of the stand while the three legs have been finished with rubber feet, keeping the whole thing nice and stable.

Product features

Number of stands	1
Sustainable product	not specified
Microphone stand weight	2 - 3 kg
Boom arm	yes
Height adjustable	yes
Colour	black
Stand material	steel
Maximum height of stand	200 to 210 cm
Included stand accessories	none
Mininum stand height	not specified
Screw thread size	5/8 inch
Set	no
Construction	2-part telescopic
Type of stand	boom stand
Type of stand base	flat base feet
Type of vlogging accessory	microphone stand / clip

Weight and dimensions including packaging

Weight (incl. packaging)	2,4 kg
Dimensions (incl. packaging)	86,5 x 11,0 x 8,0 cm

Product specifications

professional microphone stand
equipped with three stand legs with rubber feet
freely adjustable height
screw thread: 5/8-inch
freely adjustable boom arm length
vertical telescopic tube, ideal for overhead microphone setups
large, ergonomic tightening knobs
practical, collapsible construction
equipped with a practical cable management system
length when folded: 860mm
required floor surface when unfolded: 600mm
maximum height in overhead position: 2m

2x Devine MIC100/5 XLR Microphone/Signal Cable, 5m
Fitted with robust plugs and wrapped up inside a flexible yet durable outer shell, the Devine MIC100 is the ideal cable for optimally transferring any XLR audio signal from point A to point B. This is the 5-metre model.

Product features

(partially) coiled	no
Sustainable product	not specified
Right angled or straight	straight - straight
Colour	black
Length	5.00 m
Podcast bundle	no
Set	no
Audio connector	3-pin XLR
Accessory type	cable
Type of vlogging accessory	cable

Weight and dimensions including packaging

Weight (incl. packaging)	288 gr
Dimensions (incl. packaging)	24,0 x 20,0 x 4,0 cm

Product specifications

XLR male - XLR female
can be used as a microphone cable or as an all-round signal cable
supple, rugged cable
high-grade connectors with locking option
connectors with pull relief to retain contact integrity
length: 5m
filling: cotton
oxygen-free copper
isolation diameter: 1.4mm
isolation colours: red and white
number of conductors: 2
inner conductor diameter: 0.226mm²
conductor dimensions: 20 x 0.12mm
helical sheathing: 0.12 x 64
cable diameter: 6mm
sheathing material: flexible PVC
operating temperature: -20 - +70°C
capacity @ 1 kHz:
- cond.-cond.: 131pF/m
- cond.-shield.: 178pF/m

1x Devine Centro 2i2o Audio Interface
The Devine Centro 2i2o is a compact and attractively-priced audio interface packed with everything you need to start recording, including Hi-Z inputs, phantom power and a mute button.

Product features

19 inches	no
Number of analogue Inputs	2
Number of analogue outputs	2
Number of headphone outputs	1
Computer ports	USB
Digital audio inputs	none
Digital audio outputs	none
Sustainable product	not specified
Phantom power	yes
Suitable for operating system	Apple OSX / Mac OS, Microsoft Windows
Interface for	compact all-round, guitarists, vocals + guitar, keyboard players
Total guitar/bass inputs	2
Total microphone inputs	2
Low latency monitoring	yes, direct monitoring
Maximum sample rate	96 kHz
Included data cable	USB cable
Included software	Bitwig
MIDI & other	none
Network connections	none
Podcast bundle	no
Software included	yes, download
Analogue audio input type	balanced line in (TRS jack), microphone input (XLR), Hi-Z instrument input (TS jack)
Analogue audio output type	balanced line out (XLR), headphone output (jack or mini-jack)
Accessory type	audio interface

Weight and dimensions including packaging

Weight (incl. packaging)	700 gr
Dimensions (incl. packaging)	21,0 x 14,5 x 8,5 cm

Product specifications

Devine Centro 2i2o
audio interface
inputs:
- 2x XLR-jack combo
  - support for XLR mic signals, line signals (jack), Hi-Z instrument signals (jack + Hi-Z switch)
- frequency range: 20 - 20,000 Hz
- impedance: 10 kOhm line inputs, 3.3 kOhm microphone input, 500 kOhm Hi-Z
- maximum input level: +20 dBu line input, +4 dBu microphone input, +12 dBu Hi-Z
- phantom power: +48V switchable (both inputs simultaneously)
outputs:
- 2x balanced XLR outputs (stereo possible)
- frequency range: 20 - 20,000 Hz
- maximum output level: +4 dBu
audio processing:
- maximum: 24-bit, 96 kHz
- ADC dynamic range: 102 dBA at 48 kHz
- DAC dynamic range: 108 dBA at 48 kHz
power:
- USB 2.0
- USB micro B port on interface
- USB A - USB micro B
- bus-powered via USB
PC system requirements:
- Windows Vista / 7 / 8 / 8.1, 10 (32- or 64-bit)
  - drivers are required
Mac system requirements:
- OSX 10.7 or better
  - no drivers required for basic functionality, optionally available
included:
- USB cable
- Bitwig 8-Track (voucher)

Write a review

Robbie December 3, 2024

Wrote the following about Devine MIC100/5 XLR Microphone/Signal Cable, 5m

Good cable, good price, will buy more when needed :)

Marciux October 8, 2023

Wrote the following about Devine MIC100/5 XLR Microphone/Signal Cable, 5m

All brilliant.. not a first buy from them .. happy customer

David T. February 20, 2021

Wrote the following about Devine MIC100/5 XLR Microphone/Signal Cable, 5m

Brilliant cable low noise and very good quality will be ordering more of these especially at these prices

David T February 17, 2021

Wrote the following about Devine MIC100/5 XLR Microphone/Signal Cable, 5m

Very good value for the money no noise will getting more of these

Matthew W. February 14, 2021