Based on more than 21,240 customer reviews

Innox SynthStand 01 Roland AIRA Compact E-4 & P-6 Set

4.2 / 5
Innox SynthStand 01 Roland AIRA Compact E-4 & P-6 Set

Specifications

Innox SynthStand 01 Keyboard/Controller Stand
1x Innox SynthStand 01 Keyboard/Controller Stand
The Innox SynthStand 01 tabletop stand has been specifically designed to offer two smaller keyboards, synths or other outboard gear a neat and stable set-up.

Product features

Keyboard stand levels
2
Weight capacity per keyboard shelf
Not specified
Sustainable product
Not specified
Keyboard stand type
Other

Weight and dimensions including packaging

Weight
2,5 kg
Dimensions
37,0 x 29,0 x 5,0 cm

Product specifications

  • Innox SynthStand 01
  • synth/keyboard/controller stand
  • compatible with compact synthesizers, keyboards or controllers
  • display angle: 45 degrees
  • adjustable width: 18 - 29cm
  • depth of lower stand: 180 - 190mm
  • depth of upper stand: 140 - 150mm
Roland AIRA Compact E-4 Voice Tweaker
1x Roland AIRA Compact E-4 Voice Tweaker
Pretty much small enough to slot into a jacket pocket, the Roland AIRA Compact E-4 voice transformer can be used on-the-go and offers effects such as pitch correction, a vocoder and a harmonizer - all battery-powered for maximum portability.

Product features

Sustainable product
Not specified
Vocal effect type
Autotune, delay, harmonizer, looper, pitch, reverb, vocoder
Stomp box
No
Rack module
No
MIDI & other
MIDI over USB, MIDI in (mini jack), MIDI out (mini jack)

Weight and dimensions including packaging

Weight
576 gr
Dimensions
26,0 x 16,5 x 9,0 cm

Product specifications

  • Roland AIRA Compact E-4
  • voice tweaker / transformer
  • effects: auto pitch, harmony, vocoder, pitch, formant, scatter, reverb, looper
  • recording time: 24 seconds
  • ports:
    • sync in/out: 3.5mm mini-jack
    • mix in/out: 3.5mm mini-jack
    • MIDI in/out: 3.5mm mini-jack
    • mic-in: 6.3mm jack
    • USB-C
  • battery:
    • charging time: 3 hours
    • operating time: 3.5 hours
  • incl. cable: USB C - USB A
  • dimensions: 188 x 107 x 42mm
  • weight: 290 g
Roland AIRA Compact P-6 Sampler/Sequencer
1x Roland AIRA Compact P-6 Sampler/Sequencer
The Roland AIRA Series has just expanded with the addition of the P-6. A kind of tighter take on the SP-404, this portable sampler has a granular engine under the hood.

Product features

Number of analogue input channels
2
Number of analogue output channels
2
Number of digital input channels
0
Number of digital output channels
0
Number of microphone channels
1
Number of pads
6
Number of keys
16
CF card reader (CompactFlash)
No
Sustainable product
Not specified
Compatible operating system
Microsoft Windows
Headphone output
Yes
MIDI & other
MIDI over USB
SD card reader
No
Sequencer / recorder
Yes, built-in recorder/sequencer
Standalone
Yes
Type of display
Dot matrix
USB port
Yes
Equipped with audio interface
No

Weight and dimensions including packaging

Weight
695 gr
Dimensions
26,0 x 16,5 x 9,0 cm
Recommended price £344
£336 incl. 20% VAT
Online stock status: In stock

Order now = receive it on Tuesday (free)

Only 1 piece in stock in our warehouse

Wishlist

Ordered before 10pm: Delivered in 2 Working Days (if in stock)

Free delivery from £50

Lowest Price Guarantee

Free Returns

3-Year Warranty

30-Day Trial Period

Specifications

Innox SynthStand 01 Keyboard/Controller Stand
1x Innox SynthStand 01 Keyboard/Controller Stand
The Innox SynthStand 01 tabletop stand has been specifically designed to offer two smaller keyboards, synths or other outboard gear a neat and stable set-up.

Product features

Keyboard stand levels
2
Weight capacity per keyboard shelf
Not specified
Sustainable product
Not specified
Keyboard stand type
Other

Weight and dimensions including packaging

Weight
2,5 kg
Dimensions
37,0 x 29,0 x 5,0 cm

Product specifications

  • Innox SynthStand 01
  • synth/keyboard/controller stand
  • compatible with compact synthesizers, keyboards or controllers
  • display angle: 45 degrees
  • adjustable width: 18 - 29cm
  • depth of lower stand: 180 - 190mm
  • depth of upper stand: 140 - 150mm
Roland AIRA Compact E-4 Voice Tweaker
1x Roland AIRA Compact E-4 Voice Tweaker
Pretty much small enough to slot into a jacket pocket, the Roland AIRA Compact E-4 voice transformer can be used on-the-go and offers effects such as pitch correction, a vocoder and a harmonizer - all battery-powered for maximum portability.

Product features

Sustainable product
Not specified
Vocal effect type
Autotune, delay, harmonizer, looper, pitch, reverb, vocoder
Stomp box
No
Rack module
No
MIDI & other
MIDI over USB, MIDI in (mini jack), MIDI out (mini jack)

Weight and dimensions including packaging

Weight
576 gr
Dimensions
26,0 x 16,5 x 9,0 cm

Product specifications

  • Roland AIRA Compact E-4
  • voice tweaker / transformer
  • effects: auto pitch, harmony, vocoder, pitch, formant, scatter, reverb, looper
  • recording time: 24 seconds
  • ports:
    • sync in/out: 3.5mm mini-jack
    • mix in/out: 3.5mm mini-jack
    • MIDI in/out: 3.5mm mini-jack
    • mic-in: 6.3mm jack
    • USB-C
  • battery:
    • charging time: 3 hours
    • operating time: 3.5 hours
  • incl. cable: USB C - USB A
  • dimensions: 188 x 107 x 42mm
  • weight: 290 g
Roland AIRA Compact P-6 Sampler/Sequencer
1x Roland AIRA Compact P-6 Sampler/Sequencer
The Roland AIRA Series has just expanded with the addition of the P-6. A kind of tighter take on the SP-404, this portable sampler has a granular engine under the hood.

Product features

Number of analogue input channels
2
Number of analogue output channels
2
Number of digital input channels
0
Number of digital output channels
0
Number of microphone channels
1
Number of pads
6
Number of keys
16
CF card reader (CompactFlash)
No
Sustainable product
Not specified
Compatible operating system
Microsoft Windows
Headphone output
Yes
MIDI & other
MIDI over USB
SD card reader
No
Sequencer / recorder
Yes, built-in recorder/sequencer
Standalone
Yes
Type of display
Dot matrix
USB port
Yes
Equipped with audio interface
No

Weight and dimensions including packaging

Weight
695 gr
Dimensions
26,0 x 16,5 x 9,0 cm
bax-shop.uk | B-stock

Product information

Product no: 9000-0155-5262

General

These days, we want to be mobile and be able to carry our studio around in a rucksack. With all the compact synths and controllers available nowadays, it’s rather frustrating that all those traditional X-stands and Z-stands are far too big. So how do you organise all that gear neatly at home? Simple: with the Innox SynthStand 01. It’s a bit like the display stands you see in shops, so every device you place on it is clearly visible. You can place two devices on this stand, with one device able to be slightly larger than the other. The stand is width-adjustable, so even the smaller controllers fit perfectly on it.

Innox SynthStand 01 Keyboard/Controller Stand This product comes with a 3-year warranty.

Roland AIRA Compact E-4 Voice Tweaker This product comes with a 3-year warranty.

Roland AIRA Compact P-6 Sampler/Sequencer This product comes with a 3-year warranty.

Reviews (41)

4.2
41 reviews

Rating

5 stars 26 4 stars 7 3 stars 3 2 stars 2 1 star 3
5 / 5

Innox SynthStand 01 Keyboard/Controller Stand

Excellent quality, sturdy synth stand. I have mine with the Roland TB3 on the bottom tier and the Behringer TD3 on the top. Perfect!
 | 
5 / 5

Roland AIRA Compact P-6 Sampler/Sequencer

Bought for my boyfriend for Christmas - he loves it! Prompt delivery, packaged very well, would order from Bax Shop again!
 | 
5 / 5

Innox SynthStand 01 Keyboard/Controller Stand

Good Stand for the money & price.
Easy to assemble
Pretty heavy metal frame & sturdy.
After assemble i mounted my Circuit Tracks & MC 101.both fitted great.
 | 
5 / 5

Innox SynthStand 01 Keyboard/Controller Stand

Great stand for the price. No issues at all with screws. Clearly the issues pointed out with earlier builds have now been addressed. I use the stand with a Behringer RD-6 and TD-3.
 | 
5 / 5

Innox SynthStand 01 Keyboard/Controller Stand

Works great, solid build and does the job. Looks like issues reported in other reviews have been fixed. Can't fault it for the price!
 | 
1 / 5

Innox SynthStand 01 Keyboard/Controller Stand

This Innox synth stand is poorly designed and badly made. The rubber edgings are loose. Mine was missing one rubber strip and a rubber end cap when I opened the package. The adjustable cross bars are fixed to the sides with screws. The cross bars have threaded caps set into the tubes by some 5mm, and the screws are only 5mm long, so they are too short to screw into the ends! Because I needed the stand and did not have time to wait for the week or so it takes Bax deliveries to arrive, I had to modify the stand by hacksawing off the projecting tubes back to the threaded socket, and then I had to cut the rubber strips to compensate for the missing pieces, and then glue them onto the stand to prevent them from falling off again. I cannot believe that a product ships in this state.



===



Response Bax Music:



There were some stands that had manufacturing errors, unfortunately. We offer a free replacement set of screws for those stands. Send an e-mail to customer-service@bax-shop.co.uk to order this set.



The rubber edgings are supposed to be loose, so that the user can decide whether to use these or not.



Marnix | Bax Music
 | 

Reviews from other countries

5 / 5

Roland AIRA Compact P-6 Sampler/Sequencer

Ik heb een fijne ervaring gehad bij BAX. Nadat ik een B-stock Roland Aira P-6 heb laten reserveren in de winkel kon ik hem de volgende dag al halen. Ik werd vriendelijk geholpen en het product was perfect. Ik heb er veel plezier van!
 | 
This review was automatically translated from Dutch.
5 / 5

Roland AIRA Compact P-6 Sampler/Sequencer

Best product
 | 
This review was automatically translated from Dutch.
4 / 5

Innox SynthStand 01 Keyboard/Controller Stand

Very good product but watch out cause the rubber protection become sticky and might attack to the synth
 | 
This review was automatically translated from French.
5 / 5

Innox SynthStand 01 Keyboard/Controller Stand

Handig produkt omdat je het uit elkaar kan halen en de breedte precies kunt instellen.
 | 
This review was automatically translated from Dutch.

Videos

Downloads

Other people also bought

Other products from Innox

Find all products of the brand Innox

Alternative products by other brands

Search all products in category Keyboard Stands
Compare your gear (1/10)
Clear Compare