Based on more than 21,240 customer reviews

Innox SynthStand 02 Roland AIRA Compact E-4, J-6 & P-6 Set

3.7 / 5
Innox SynthStand 02 Roland AIRA Compact E-4, J-6 & P-6 Set

Specifications

Innox SynthStand 02 Keyboard/Controller Stand
1x Innox SynthStand 02 Keyboard/Controller Stand
The SynthStand 02 by Innox is specially designed to hold three compact synthesizers, keyboards or controllers. The width of this adaptable stand can be adjusted with ease, making it compatible with a wide range of different gear.

Product features

Keyboard stand levels
3
Weight capacity per keyboard shelf
Not specified
Sustainable product
Not specified
Keyboard stand type
Other

Weight and dimensions including packaging

Weight
5,4 kg
Dimensions
46,0 x 46,0 x 5,0 cm

Product specifications

  • Innox SynthStand 02
  • synth/keyboard/controller stand
  • suitable for compact synthesizers, keyboards or controllers
  • display angle: 45 degrees
  • adjustable width: 18 - 29cm
  • depth of lower stand: 180 - 190mm
  • depth of upper stand: 140 - 150mm
  • depth of upper stand: 130 - 140mm
Roland AIRA Compact E-4 Voice Tweaker
1x Roland AIRA Compact E-4 Voice Tweaker
Pretty much small enough to slot into a jacket pocket, the Roland AIRA Compact E-4 voice transformer can be used on-the-go and offers effects such as pitch correction, a vocoder and a harmonizer - all battery-powered for maximum portability.

Product features

Sustainable product
Not specified
Vocal effect type
Autotune, delay, harmonizer, looper, pitch, reverb, vocoder
Stomp box
No
Rack module
No
MIDI & other
MIDI over USB, MIDI in (mini jack), MIDI out (mini jack)

Weight and dimensions including packaging

Weight
576 gr
Dimensions
26,0 x 16,5 x 9,0 cm

Product specifications

  • Roland AIRA Compact E-4
  • voice tweaker / transformer
  • effects: auto pitch, harmony, vocoder, pitch, formant, scatter, reverb, looper
  • recording time: 24 seconds
  • ports:
    • sync in/out: 3.5mm mini-jack
    • mix in/out: 3.5mm mini-jack
    • MIDI in/out: 3.5mm mini-jack
    • mic-in: 6.3mm jack
    • USB-C
  • battery:
    • charging time: 3 hours
    • operating time: 3.5 hours
  • incl. cable: USB C - USB A
  • dimensions: 188 x 107 x 42mm
  • weight: 290 g
Roland AIRA Compact J-6 Chord Synth
1x Roland AIRA Compact J-6 Chord Synth
If you're thinking about getting a Roland AIRA Compact but want something that can help build chords, then look no further than the Roland AIRA Compact J-6. This synth houses the sound of a Juno-60, but is just as portable as the E-4 and T-8.

Product features

19-inch rack size
Not applicable
Number of keys
13
Arpeggiator/sequencer
None
Audio via USB
No
Control
None
Sustainable product
Not specified
Synthesizer inputs
Line in
Sound source
Virtual analogue
MIDI & other
MIDI in (mini jack), MIDI out (mini jack)
Synthesizer options
Simple
Synthesizer outputs
Line out jack, headphone
Polyphony
4
Synthesizer kind
Standard
Type of keys
Touch-sensitive keys/pads
Vintage remake
No
Synthesizer type
Desktop module
Difficulty level
Easy

Weight and dimensions including packaging

Weight
581 gr
Dimensions
26,0 x 16,5 x 9,0 cm

Product specifications

  • Roland AIRA Compact J-6
  • chord sequencer
  • the sound of the Juno-60
  • patterns: 64
  • sequencer: 64 steps
  • instruments: 64
  • effects: delay, reverb
  • plugs:
    • sync in/out: 3.5mm mini-jack
    • mix in/out: 3.5mm mini-jack
    • MIDI in/out: 3.5mm mini-jack
    • USB-C
  • battery:
    • duration: 4.5 hours
    • charging time: 3 hours
  • USB C to USB A cable included
  • dimensions: 188 x 106 x 36mm
  • weight: 295g
Roland AIRA Compact P-6 Sampler/Sequencer
1x Roland AIRA Compact P-6 Sampler/Sequencer
The Roland AIRA Series has just expanded with the addition of the P-6. A kind of tighter take on the SP-404, this portable sampler has a granular engine under the hood.

Product features

Number of analogue input channels
2
Number of analogue output channels
2
Number of digital input channels
0
Number of digital output channels
0
Number of microphone channels
1
Number of pads
6
Number of keys
16
CF card reader (CompactFlash)
No
Sustainable product
Not specified
Compatible operating system
Microsoft Windows
Headphone output
Yes
MIDI & other
MIDI over USB
SD card reader
No
Sequencer / recorder
Yes, built-in recorder/sequencer
Standalone
Yes
Type of display
Dot matrix
USB port
Yes
Equipped with audio interface
No

Weight and dimensions including packaging

Weight
695 gr
Dimensions
26,0 x 16,5 x 9,0 cm
Recommended price £519 -3%
£506 incl. 20% VAT
Online stock status: In stock

Order now = receive it on Tuesday (free)

Only 1 piece in stock in our warehouse

Wishlist

Ordered before 10pm: Delivered in 2 Working Days (if in stock)

Free delivery from £50

Lowest Price Guarantee

Free Returns

3-Year Warranty

30-Day Trial Period

Specifications

Innox SynthStand 02 Keyboard/Controller Stand
1x Innox SynthStand 02 Keyboard/Controller Stand
The SynthStand 02 by Innox is specially designed to hold three compact synthesizers, keyboards or controllers. The width of this adaptable stand can be adjusted with ease, making it compatible with a wide range of different gear.

Product features

Keyboard stand levels
3
Weight capacity per keyboard shelf
Not specified
Sustainable product
Not specified
Keyboard stand type
Other

Weight and dimensions including packaging

Weight
5,4 kg
Dimensions
46,0 x 46,0 x 5,0 cm

Product specifications

  • Innox SynthStand 02
  • synth/keyboard/controller stand
  • suitable for compact synthesizers, keyboards or controllers
  • display angle: 45 degrees
  • adjustable width: 18 - 29cm
  • depth of lower stand: 180 - 190mm
  • depth of upper stand: 140 - 150mm
  • depth of upper stand: 130 - 140mm
Roland AIRA Compact E-4 Voice Tweaker
1x Roland AIRA Compact E-4 Voice Tweaker
Pretty much small enough to slot into a jacket pocket, the Roland AIRA Compact E-4 voice transformer can be used on-the-go and offers effects such as pitch correction, a vocoder and a harmonizer - all battery-powered for maximum portability.

Product features

Sustainable product
Not specified
Vocal effect type
Autotune, delay, harmonizer, looper, pitch, reverb, vocoder
Stomp box
No
Rack module
No
MIDI & other
MIDI over USB, MIDI in (mini jack), MIDI out (mini jack)

Weight and dimensions including packaging

Weight
576 gr
Dimensions
26,0 x 16,5 x 9,0 cm

Product specifications

  • Roland AIRA Compact E-4
  • voice tweaker / transformer
  • effects: auto pitch, harmony, vocoder, pitch, formant, scatter, reverb, looper
  • recording time: 24 seconds
  • ports:
    • sync in/out: 3.5mm mini-jack
    • mix in/out: 3.5mm mini-jack
    • MIDI in/out: 3.5mm mini-jack
    • mic-in: 6.3mm jack
    • USB-C
  • battery:
    • charging time: 3 hours
    • operating time: 3.5 hours
  • incl. cable: USB C - USB A
  • dimensions: 188 x 107 x 42mm
  • weight: 290 g
Roland AIRA Compact J-6 Chord Synth
1x Roland AIRA Compact J-6 Chord Synth
If you're thinking about getting a Roland AIRA Compact but want something that can help build chords, then look no further than the Roland AIRA Compact J-6. This synth houses the sound of a Juno-60, but is just as portable as the E-4 and T-8.

Product features

19-inch rack size
Not applicable
Number of keys
13
Arpeggiator/sequencer
None
Audio via USB
No
Control
None
Sustainable product
Not specified
Synthesizer inputs
Line in
Sound source
Virtual analogue
MIDI & other
MIDI in (mini jack), MIDI out (mini jack)
Synthesizer options
Simple
Synthesizer outputs
Line out jack, headphone
Polyphony
4
Synthesizer kind
Standard
Type of keys
Touch-sensitive keys/pads
Vintage remake
No
Synthesizer type
Desktop module
Difficulty level
Easy

Weight and dimensions including packaging

Weight
581 gr
Dimensions
26,0 x 16,5 x 9,0 cm

Product specifications

  • Roland AIRA Compact J-6
  • chord sequencer
  • the sound of the Juno-60
  • patterns: 64
  • sequencer: 64 steps
  • instruments: 64
  • effects: delay, reverb
  • plugs:
    • sync in/out: 3.5mm mini-jack
    • mix in/out: 3.5mm mini-jack
    • MIDI in/out: 3.5mm mini-jack
    • USB-C
  • battery:
    • duration: 4.5 hours
    • charging time: 3 hours
  • USB C to USB A cable included
  • dimensions: 188 x 106 x 36mm
  • weight: 295g
Roland AIRA Compact P-6 Sampler/Sequencer
1x Roland AIRA Compact P-6 Sampler/Sequencer
The Roland AIRA Series has just expanded with the addition of the P-6. A kind of tighter take on the SP-404, this portable sampler has a granular engine under the hood.

Product features

Number of analogue input channels
2
Number of analogue output channels
2
Number of digital input channels
0
Number of digital output channels
0
Number of microphone channels
1
Number of pads
6
Number of keys
16
CF card reader (CompactFlash)
No
Sustainable product
Not specified
Compatible operating system
Microsoft Windows
Headphone output
Yes
MIDI & other
MIDI over USB
SD card reader
No
Sequencer / recorder
Yes, built-in recorder/sequencer
Standalone
Yes
Type of display
Dot matrix
USB port
Yes
Equipped with audio interface
No

Weight and dimensions including packaging

Weight
695 gr
Dimensions
26,0 x 16,5 x 9,0 cm
bax-shop.uk | B-stock

Product information

Product no: 9000-0155-5605

General

We get asked this question often enough at the helpdesk: “What sort of stand should I use for this controller?” With a standard keyboard, it’s simple – there are countless X-stands and Z-stands available. But that doesn’t work for mini-keyboards and similar controllers and synths. To set up such compact and portable gear neatly at home, you can use the Innox SynthStand 02. This is a small stand with a 45-degree viewing angle and three slots. So you could fit three mini-keyboards on it, and if you make the stand narrower, you could also place a controller on it.

Innox SynthStand 02 Keyboard/Controller Stand This product comes with a 3-year warranty.

Roland AIRA Compact E-4 Voice Tweaker This product comes with a 3-year warranty.

Roland AIRA Compact J-6 Chord Synth This product comes with a 3-year warranty.

Roland AIRA Compact P-6 Sampler/Sequencer This product comes with a 3-year warranty.

Reviews (50)

3.7
50 reviews

Rating

5 stars 22 4 stars 8 3 stars 9 2 stars 5 1 star 6
1 / 5

Innox SynthStand 02 Keyboard/Controller Stand

Rubber trim reacted and fused with the plastic on my synths damaging them. Removed the trim and the top tier is out of alignment and the synth wobbles. If this wasn't an issue I would have bought many more of these. Will be replacing with something else.
 | 
5 / 5

Roland AIRA Compact P-6 Sampler/Sequencer

Bought for my boyfriend for Christmas - he loves it! Prompt delivery, packaged very well, would order from Bax Shop again!
 | 
5 / 5

Innox SynthStand 02 Keyboard/Controller Stand

After reading the reviews for this product, I decided to buy this anyway, as it was so cheap. I figured I would be able to pick up some replacement screws from a DIY store.

I waited around 3 months for this to arrive, due to it being out of stock and when it did arrive, I could see no issues with the screws and I put it together in a matter of minutes. This must be a new batch and it also came with an extra set of tightening knobs. I can't really comment on the rubber trim. Only time will tell but due to the weight of the stand, they may fail. Who knows what it's like after it's fully loaded with synths but I don't see it as a deal breaker. I have a RYTM, Bass Bot and TR-09 set up, with there just being enough room for the cables.

A very sturdy stand and I would recommend this to all of my friends.
 | 
4 / 5

Innox SynthStand 02 Keyboard/Controller Stand

Purchased stand recently for reface keyboard and a few desktop synths. Much better than using a desktop laptop stand and width can be extended. Only reason this does not get 5 is due to the loose rubber trimming. For a budget ranged desktop stand, you cannot go wrong.
 | 
3 / 5

Innox SynthStand 02 Keyboard/Controller Stand

Stand is very heavy and unsuitable for portable use. I had to raid my garage to find two screws for assembly as the ones provided are too short. Rubber trim falls off and needs to be glued in place. Once you overcome these problems it proves to be very sturdy for a home studio environment.
 | 
4 / 5

Innox SynthStand 02 Keyboard/Controller Stand

Excellent. Very heavy, sturdy stands. Holding my 303s, Gilbert's and a 606 (I bought 2 of them). The rubber on the sides can be removed, but it's good in that it holds your gear in place / prevents it sliding side to side should you knock it slightly.

Definitely suits my needs to keep thing very secure.
 | 
1 / 5

Innox SynthStand 02 Keyboard/Controller Stand

Very bad product first it came with short screws went to buy two new one !! verdict is rubish product I suggest build your own until someone will design properly not happy at all
 | 
1 / 5

Innox SynthStand 02 Keyboard/Controller Stand

Wow. Just wow. I received an Innox Synthstand 02 in the post today and I'm floored. I was expecting it to be a little on the cheap side. But I didn't expect it to be this bad. Here's what I found:



The package is super heavy due to the thick slabs of steel for the side panels. I've never received a consumer product that's this heavy for its size. It feels irresponsible to purchase a product that so flagrantly wastes material. It also seems wasteful to spend resources shipping so much excess material across the globe.



Due to the excessive weight, this stand is for home/studio use only. This is not a "toss in your backpack on the way to the gig" stand.



The rubber trim constantly falls off as I handle the stand. It's a major nuisance.



The rubber trim caps on the tabs are very thin. I wouldn't be surprised if they tear eventually and fall off.



There are bits of dust and debris embedded in the paint. Very poor quality.



It's impossible to assemble the stand because the threaded knobs aren't long enough to reach the large diameter end of each tube. On the narrow end of each tube, the knobs just barely mate with the tube; I can only get 1 thread of engagement. This is a big no-no. There should be a minimum of 3 threads of engagement.



All in all, the product gives the impression of cheapness for cheapness's sake. I own a few stands of a similar design from another company and they work great. I thought the Innox stand would be a nice way of getting basically the same product for a lower price. Wrongo!
 | 

Reviews from other countries

5 / 5

Roland AIRA Compact J-6 Chord Synth

Een erg inspirerende kleine synthesizer voor akkoorden, met een volwassen juno geluid. De chord functie kun je ook uitzetten zodat je ook losse noten kunt spelen. De klank vind ik erg mooi, al is de klank variatie beperkt. Audio via usb zou niet mogelijk zijn, maar ik kreeg wel het geluid via usb in mijn daw. Veel instellingen zitten een beetje verborgen maar via shift + andere knop toch makkelijk te vinden.
Ik twijfelde of ik deze wel zou aanschaffen, maar dat was niet nodig. Het is gewoon een erg leuk synthesizer tje.
 | 
This review was automatically translated from Dutch.
5 / 5

Roland AIRA Compact P-6 Sampler/Sequencer

Ik heb een fijne ervaring gehad bij BAX. Nadat ik een B-stock Roland Aira P-6 heb laten reserveren in de winkel kon ik hem de volgende dag al halen. Ik werd vriendelijk geholpen en het product was perfect. Ik heb er veel plezier van!
 | 
This review was automatically translated from Dutch.

Videos

Downloads

Other people also bought

Other products from Innox

Find all products of the brand Innox

Alternative products by other brands

Search all products in category Keyboard Stands
Compare your gear (1/10)
Clear Compare