SE Electronics SE2200 Podcast/Content Creator Recording Star

SE Electronics SE2200 Podcast/Content Creator Recording Starter Kit

4.6 / 5

Specifications

1x SE Electronics SE2200 Large-Diaphragm Condenser Microphone

The SE2200 by SE Electronics is a large-diaphragm condenser mic with a cardioid pickup pattern. It's a versatile mic with a high-pass filter and an attenuation pad switch, and comes with a shock mount and a pop filter.

Product features

Sustainable product: Not specified
Microphone sensitivity (dBV/PA): -32
Microphone impedance: 0-49 ohms
Low-cut filter: Yes
Maximum SPL: 140 dB - 149 dB
Maximum frequency: 20 - 20.9 kHz
Minimum frequency: 20 - 21 Hz
Pad switch: Yes
Polar pattern: Cardioid
Multi-pattern: No
Tube microphone: No
Stereo: No
Microphone accessories: Shock mount, pop filter
Vintage microphone family: Not applicable
Microphone sound: Clean/neutral

Weight and dimensions including packaging

Weight: 1,4 kg
Dimensions: 28,5 x 23,0 x 14,0 cm

Product specifications

SE Electronics SE2200
large-diaphragm condenser microphone
pickup pattern: cardioid
frequency response: 20 Hz to 20 kHz
impedance: < 50 Ohms
sensitivity: -32.5 dBV/PA
connector: 3-pin XLR
included:
- shock mount
- thread adapter
- pop filter
dimensions: 51 x 215 mm
weight: 611 g

1x Innox IVA 28 Tabletop Microphone Stand

The Innox IVA 28 is a simple but effective, sturdy mic stand, designed to be placed on a table or desk top. The angle and height are both adjustable and it features a heavy base for extra stability.

Product features

Number of stands: 1
Sustainable product: Not specified
Microphone stand weight: 2 - 3 kg
Boom arm: No
Height adjustable: Yes
Colour: Chrome, black
Stand material: Steel
Maximum height of stand: 50 to 60 cm
Included stand accessories: None
Mininum stand height: 35 to 40 cm
Podcast bundle: No
Screw thread size: 3/8 inch, 5/8 inch
Set: No
Construction: Slanted base/boom
Accessory type: Microphone stand
Type of stand: Tabletop stand/tripod
Type of stand base: Base plate

Weight and dimensions including packaging

Weight: 2,1 kg
Dimensions: 36,0 x 15,0 x 6,5 cm

Product specifications

dimensions (boom upright): 17 x 14 x 39 - 53cm
boom length (extendible): 36 - 50cm
thread size: 5/8" (3/8" when unscrewed)
boom microphone (pivots 180 degrees)
box contents:
- 1x boom
- 1x base

1x Audient iD14 mkII USB-C Audio Interface

The Audient iD14 MKII is the next logical and modernised step in the development of the iD Series. Just like before, this plucky and portable audio interface harbours the power of much bigger, studio-grade consoles.

Product features

Sustainable product: Not specified
Number of analogue Inputs: 2
Number of analogue outputs: 4
Analogue audio input type: Balanced line in (TRS jack), microphone input (XLR), Hi-Z instrument input (TS jack)
Analogue audio output type: Balanced line out (TRS jack), headphone output (jack or mini-jack)
Total microphone inputs: 2
Total guitar/bass inputs: 1
Network connections: None
Digital audio inputs: 1 x ADAT
Digital audio outputs: None
MIDI & other connectivity: None
Computer ports: USB 3.2 (USB C)
Number of headphone outputs: 1
Low latency monitoring: Yes, direct monitoring
Maximum sample rate: 96 kHz
Software included: Yes, download
Included software: Cubase AI/LE
Included data cable: USB-C cable
Phantom power: Yes
19 inches: No
Compatible operating system: Apple OSX / Mac OS, Microsoft Windows

Weight and dimensions including packaging

Weight: 1,1 kg
Dimensions: 23,0 x 16,0 x 10,0 cm

Product specifications

Audio Interface
frequency response: 10 Hz - 40 kHz
interface: USB-C/USB3
phantom power supply via USB3
ScrollControl
iD button to assign the following functions:
- DIM, CUT, Polarity Reverse, Mono Sum, Talkback, Cue Mix monitoring
bus powered
included:
ARC software and Cubase LE/Cubase LE iOS

1x Devine MIC100/1.5 XLR Microphone/Signal Cable, 1.5m

Fitted with robust plugs and wrapped up inside a flexible yet durable outer shell, the Devine MIC100 is the ideal cable for optimally transferring any XLR audio signal from point A to point B. This is the 1.5-metre model.

Product features

Sustainable product: Not specified
Audio connector: 3-pin XLR
Length: 1.50 m
Colour: Black
Set: No
(partially) coiled: No
Right angled or straight: Straight - straight

Weight and dimensions including packaging

Weight: 100 gr
Dimensions: 15,0 x 15,0 x 3,0 cm

Product specifications

XLR male - XLR female
can be used as a microphone cable or as an all-round signal cable
supple, rugged cable
high-grade connectors with locking option
connectors with pull relief to retain contact integrity
length: 1.5m
filling: cotton
oxygen-free copper
isolation diameter: 1.4mm
isolation colours: red and white
number of conductors: 2
inner conductor diameter: 0.226mm²
conductor dimensions: 20 x 0.12mm
helical sheathing: 0.12 x 64
cable diameter: 6mm
sheathing material: flexible PVC
operating temperature: -20 - +70°C
capacity @ 1 kHz:
- cond.-cond.: 131pF/m
- cond.-shield.: 178pF/m

1x Devine PRO 2000 Studio Headphones

Built for both professional and casual listening, the Devine PRO 2000 headphones come with some solid specifications: efficient drivers, low impedance, exceptional comfort and a generous price-tag.

Product features

Active noise suppression: No
Wireless: No
Rotatable earpad: No
Driver diameter: 40 mm
Sustainable product: Not specified
Sensitivity: 95 - 99 dB
Headphone weight: Not specified
Headphone construction: Closed
Headphone impedance: 30-39 ohms
In/on/over ear: Over-ear
Includes microphone: No
Design can be folded/dismantled: No
Removable cable: No
Cable length: > / = 300 cm
Colour: Black
Maximum frequency: 22 - 22.9 kHz
Minimum frequenty: 15 - 17 Hz
Podcast bundle: No
Audio connector: Jack 3.5 mm TRS, jack 6.3 mm TRS
Accessory type: Headphones
Headphone design: Modern
Volume control: No

Weight and dimensions including packaging

Weight: 400 gr
Dimensions: 22,5 x 19,0 x 10,0 cm

Product specifications

studio headphones
closed construction
folding design
swivel mechanism per earpiece
padded ear cushions and headband
adjustable headband (max. 35mm per side)
soft ear pads, made of synthetic leather
driver diameter: 40mm
frequency range: 15Hz - 22kHz
impedance: 32 Ohms
sensitivity: 95dB (+/- 3dB)
maximum input power: 400 mW
cord length: 3m (straight)
connector: 3.5mm mini-jack (6.3mm jack adapter included)

Specifications

1x SE Electronics SE2200 Large-Diaphragm Condenser Microphone

Product features

Sustainable product: Not specified
Microphone sensitivity (dBV/PA): -32
Microphone impedance: 0-49 ohms
Low-cut filter: Yes
Maximum SPL: 140 dB - 149 dB
Maximum frequency: 20 - 20.9 kHz
Minimum frequency: 20 - 21 Hz
Pad switch: Yes
Polar pattern: Cardioid
Multi-pattern: No
Tube microphone: No
Stereo: No
Microphone accessories: Shock mount, pop filter
Vintage microphone family: Not applicable
Microphone sound: Clean/neutral

Weight and dimensions including packaging

Weight: 1,4 kg
Dimensions: 28,5 x 23,0 x 14,0 cm

Product specifications

SE Electronics SE2200
large-diaphragm condenser microphone
pickup pattern: cardioid
frequency response: 20 Hz to 20 kHz
impedance: < 50 Ohms
sensitivity: -32.5 dBV/PA
connector: 3-pin XLR
included:
- shock mount
- thread adapter
- pop filter
dimensions: 51 x 215 mm
weight: 611 g

1x Innox IVA 28 Tabletop Microphone Stand

The Innox IVA 28 is a simple but effective, sturdy mic stand, designed to be placed on a table or desk top. The angle and height are both adjustable and it features a heavy base for extra stability.

Product features

Number of stands: 1
Sustainable product: Not specified
Microphone stand weight: 2 - 3 kg
Boom arm: No
Height adjustable: Yes
Colour: Chrome, black
Stand material: Steel
Maximum height of stand: 50 to 60 cm
Included stand accessories: None
Mininum stand height: 35 to 40 cm
Podcast bundle: No
Screw thread size: 3/8 inch, 5/8 inch
Set: No
Construction: Slanted base/boom
Accessory type: Microphone stand
Type of stand: Tabletop stand/tripod
Type of stand base: Base plate

Weight and dimensions including packaging

Weight: 2,1 kg
Dimensions: 36,0 x 15,0 x 6,5 cm

Product specifications

dimensions (boom upright): 17 x 14 x 39 - 53cm
boom length (extendible): 36 - 50cm
thread size: 5/8" (3/8" when unscrewed)
boom microphone (pivots 180 degrees)
box contents:
- 1x boom
- 1x base

1x Audient iD14 mkII USB-C Audio Interface

Product features

Sustainable product: Not specified
Number of analogue Inputs: 2
Number of analogue outputs: 4
Analogue audio input type: Balanced line in (TRS jack), microphone input (XLR), Hi-Z instrument input (TS jack)
Analogue audio output type: Balanced line out (TRS jack), headphone output (jack or mini-jack)
Total microphone inputs: 2
Total guitar/bass inputs: 1
Network connections: None
Digital audio inputs: 1 x ADAT
Digital audio outputs: None
MIDI & other connectivity: None
Computer ports: USB 3.2 (USB C)
Number of headphone outputs: 1
Low latency monitoring: Yes, direct monitoring
Maximum sample rate: 96 kHz
Software included: Yes, download
Included software: Cubase AI/LE
Included data cable: USB-C cable
Phantom power: Yes
19 inches: No
Compatible operating system: Apple OSX / Mac OS, Microsoft Windows

Weight and dimensions including packaging

Weight: 1,1 kg
Dimensions: 23,0 x 16,0 x 10,0 cm

Product specifications

Audio Interface
frequency response: 10 Hz - 40 kHz
interface: USB-C/USB3
phantom power supply via USB3
ScrollControl
iD button to assign the following functions:
- DIM, CUT, Polarity Reverse, Mono Sum, Talkback, Cue Mix monitoring
bus powered
included:
ARC software and Cubase LE/Cubase LE iOS

1x Devine MIC100/1.5 XLR Microphone/Signal Cable, 1.5m

Product features

Sustainable product: Not specified
Audio connector: 3-pin XLR
Length: 1.50 m
Colour: Black
Set: No
(partially) coiled: No
Right angled or straight: Straight - straight

Weight and dimensions including packaging

Weight: 100 gr
Dimensions: 15,0 x 15,0 x 3,0 cm

Product specifications

XLR male - XLR female
can be used as a microphone cable or as an all-round signal cable
supple, rugged cable
high-grade connectors with locking option
connectors with pull relief to retain contact integrity
length: 1.5m
filling: cotton
oxygen-free copper
isolation diameter: 1.4mm
isolation colours: red and white
number of conductors: 2
inner conductor diameter: 0.226mm²
conductor dimensions: 20 x 0.12mm
helical sheathing: 0.12 x 64
cable diameter: 6mm
sheathing material: flexible PVC
operating temperature: -20 - +70°C
capacity @ 1 kHz:
- cond.-cond.: 131pF/m
- cond.-shield.: 178pF/m

1x Devine PRO 2000 Studio Headphones

Built for both professional and casual listening, the Devine PRO 2000 headphones come with some solid specifications: efficient drivers, low impedance, exceptional comfort and a generous price-tag.

Product features

Active noise suppression: No
Wireless: No
Rotatable earpad: No
Driver diameter: 40 mm
Sustainable product: Not specified
Sensitivity: 95 - 99 dB
Headphone weight: Not specified
Headphone construction: Closed
Headphone impedance: 30-39 ohms
In/on/over ear: Over-ear
Includes microphone: No
Design can be folded/dismantled: No
Removable cable: No
Cable length: > / = 300 cm
Colour: Black
Maximum frequency: 22 - 22.9 kHz
Minimum frequenty: 15 - 17 Hz
Podcast bundle: No
Audio connector: Jack 3.5 mm TRS, jack 6.3 mm TRS
Accessory type: Headphones
Headphone design: Modern
Volume control: No

Weight and dimensions including packaging

Weight: 400 gr
Dimensions: 22,5 x 19,0 x 10,0 cm

Product specifications

studio headphones
closed construction
folding design
swivel mechanism per earpiece
padded ear cushions and headband
adjustable headband (max. 35mm per side)
soft ear pads, made of synthetic leather
driver diameter: 40mm
frequency range: 15Hz - 22kHz
impedance: 32 Ohms
sensitivity: 95dB (+/- 3dB)
maximum input power: 400 mW
cord length: 3m (straight)
connector: 3.5mm mini-jack (6.3mm jack adapter included)

Service promise

SE Electronics SE2200 Large-Diaphragm Condenser Microphone This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Innox IVA 28 Tabletop Microphone Stand This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Audient iD14 mkII USB-C Audio Interface This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Devine MIC100/1.5 XLR Microphone/Signal Cable, 1.5m This product comes with a manufacturing defects warranty.

This product comes with a manufacturing defects warranty.

Devine PRO 2000 Studio Headphones This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Reviews (502)

4.6

502 reviews

Rating

5 stars 359 4 stars 99 3 stars 21 2 stars 13 1 star 10

Write a review

5 / 5

Audient iD14 mkII USB-C Audio Interface

Not used it a huge amount yet but setup was easy and it sounds good. Nice compact form factor and feels very solid.

January 16, 2022 | James M.

5 / 5

Innox IVA 28 Tabletop Microphone Stand

The Innox mic stand is well made and looks very smart. I use it with a single Behringer C2 condenser microphone (mass (75g) when I sing and play acoustic guitar in online sessions and virtual open mics. It sits beside my laptop on a desk, and has taken the place of a very heavy drum mic stand. The adjusting wheel works pretty well, but someone with weakness in the hand or wrist might like a larger wheel. I'd only knock a third of a star off for this!
If the stand is fully extended at a steep angle like 70-90 degrees, it is difficult to knock over.
I tried the stand out with the fairly heavy (285g) Shure 58A with XLR cable connected, and it was stable even at 50 degrees to the horizontal. This is pretty good, after all, you have to take sensible care with even the most stable of floor mounted mic stands.
When placed on a table or desk top extended, the Innox stand extends enough to position the microphone halfway between the guitar's soundhole and your mouth. By standing 45-50cm away, you can achieve a good balance between voice and guitar even if you move slightly, so the stand can also be used for home recordings.

April 23, 2021 | Colin W.

5 / 5

Devine PRO 2000 Studio Headphones

These Stereo Headphones are very comfortable to wear. I am particularly delighted with the how light they feel when wearing them on my head. What's more they give a truly spacial sound to my CD's when I listen to them through these Headphones. They are particularly good when I am listening to my Electronic Piano or Korg Arranger because they have a really full around your head sense of sounds. It all sounds very good through these Headphones indeed. I am more than happy to recommend these Headphones to anyone who is looking for good quality and range of sounds through these Headphones. They are just the job and so inexpensive!! Live Long And Prosper. Brian John Ainsworth

April 16, 2021 | Brian John Ainsworth

5 / 5

Devine MIC100/1.5 XLR Microphone/Signal Cable, 1.5m

Solid cable. Nothing fancy, just does the job. Rubber coating can develop rolls if left in the same position for a long time (such as bent when going into a PA) but that's to be expected. For the price, 15/10.

October 27, 2020 | Noah

5 / 5

Devine PRO 2000 Studio Headphones

Bought these for practising my bass without disturbing others. The length of the lead is helpful as it easily plugs into my floor effects pedal that I use for practicing as well as a Blackstar amPlug. Good sound quality and comfortable and very reasonably priced.

June 8, 2020 | James L.

5 / 5

Devine PRO 2000 Studio Headphones

The Devine Pro 2000 Studio headphones do not fold up, but are great for listening to stereo music on your phone or watching tv. They come with a very long lead and a screw on stereo jack adapter. They have great bass and superb sound. I am happy i bought these for £22.95 and cant believe £500 headphones are £477 better and i have no desire to find out.

June 8, 2020 | Robert D

5 / 5

Devine MIC100/1.5 XLR Microphone/Signal Cable, 1.5m

Perfect for use with my controller and behringer studio speakers, great quality.

January 17, 2020 | Natasha

3 / 5

Devine PRO 2000 Studio Headphones

Got this item with a great quality of bass!

May 13, 2019 | Jame P

5 / 5

Devine PRO 2000 Studio Headphones

Got these for a couple of reasons and never really expected them to outperform or even equal more expensive headphones that I own and to be honest, they don't. What they do give though is a nice lightweight fit, comfy around the ears and great for occasional use where you may not wish too great a level of detail or overpowering bass etc. So, in buying these, I was really looking for something that would be useful to use with a mp3 player or tablet etc and if they got damaged in the commuting environment or busy domestic setting, that I wouldn't be too upset about it. However, they are actually not bad at all, but as said above, won't match the high flyers in any way. They look good, are very reasonably priced for what you get, are copy and deliver enough quality that tells you that you haven't wasted some money on some cheap phones, but instead have purchased some very good budget headphones that you can be happy with for as long as they stay with you. Fold away into a nice easy size for a jacket pocket and have a nice long uncoiled lead that makes that easy too. In short - recommended for what they profess to be and actually are in actual use.

January 19, 2017 | Harry D.

5 / 5

Devine MIC100/1.5 XLR Microphone/Signal Cable, 1.5m

Absolutely excellent these cables are super OFC and the best value i could find anywhere, and, as usual, prices are very very competitive indeed, service great, products great, delivery and packaging great, what more do you need to know. keep it up Bax shop.

July 13, 2016 | ANTHONY M.

Videos