Shure SM7dB + Devine MicCon XLR Podcast Bundle

Shure SM7dB + Devine MicCon XLR Podcast Bundle
Product no: 9000-0140-1613 Bax Music Warranty: Shure SM7dB Dynamic Studio Microphone with Built-in Preamp This product comes with a 3-year warranty. Devine MicCon XLR to USB Interface This product comes with a 3-year warranty. Innox IVA08 XLR Pro Broadcast Microphone Stand This product comes with a 3-year warranty.

Specifications

1x Shure SM7dB Dynamic Studio Microphone with Built-in Preamp
While the Shure SM7B has become an essential live streaming, podcasting and vlogging tool, it came with one major drawback - a super-low output. With the Shure SM7dB, that problem is made a thing of the distant past.

Product features

On/Off Switch	No
Sustainable product	not specified
Microphone sensitivity (dBV/PA)	-59
Microphone weight	750-999 grams
Microphone impedance	0-49 ohms
Maximum SPL	not specified
Maximum frequency	20 - 20.9 kHz
Microphone accessories	booster/preamp, windshield
Microphone set	no
Minimum frequency	50 - 59 Hz
Podcast bundle	no
Polar pattern	cardioid
Audio connector	3-pin XLR
Microphone type	dynamic
Accessory type	microphone (XLR/jack)

Weight and dimensions including packaging

Weight (incl. packaging)	1,3 kg
Dimensions (incl. packaging)	34,5 x 18,5 x 12,5 cm

Product specifications

microphone type: dynamic, moving coil
pickup pattern: cardioid
frequency response: 50Hz - 20kHz
output impedance:
- 150 Ohm in Bypass Mode,
- 27 Ohm in Preamp Mode
sensitivity:
- -59 dBV/Pa [94 dB SPL] (1.12 mV) Flat Response Bypass Mode
- -41 dBV/Pa [94 dB SPL] (1.12 mV) Flat Response +18 Preamp Mode
- -31 dBV/Pa [94 dB SPL] (1.12 mV) Flat Response +28 Preamp Mode
housing: black enamelled aluminium and steel with black foam-rubber wind cap
weight: 837g

1x Devine MicCon XLR to USB Interface
This handy USB interface turns your analogue XLR signal into a digital USB signal, so you can directly record your microphone signal to your computer without having to buy an audio interface.

Product features

19 inches	no
Number of analogue Inputs	1
Number of analogue outputs	n/a
Number of headphone outputs	0
Computer ports	USB
Digital audio inputs	none
Digital audio outputs	none
Sustainable product	not specified
Phantom power	no
Suitable for operating system	Apple OSX / Mac OS, Microsoft Windows
Interface for	online meetings
Total guitar/bass inputs	none
Total microphone inputs	1
Low latency monitoring	no
Maximum sample rate	44.1 kHz
Included data cable	none
Included software	none
MIDI & other	none
Network connections	none
Software included	no
Analogue audio input type	microphone input (XLR)
Analogue audio output type	balanced line out (XLR)

Weight and dimensions including packaging

Weight (incl. packaging)	36 gr
Dimensions (incl. packaging)	16,0 x 12,4 x 2,3 cm

1x Innox IVA08 XLR Pro Broadcast Microphone Stand
The Innox IVA08 XLR Pro broadcast microphone stand is a pro-grade accessory designed for broadcasters, vloggers, and podcasters alike. Neatly clamp this space-saving stand to the edge of the desk and set up the optimum mic position.

Product features

Number of stands	1
Sustainable product	not specified
Microphone stand weight	2 - 3 kg
Boom arm	no
Height adjustable	not applicable
Colour	black
Stand material	steel
Maximum height of stand	not applicable
Included stand accessories	integrated cable (XLR)
Mininum stand height	not applicable
Podcast bundle	no
Screw thread size	3/8 inch, 5/8 inch
Set	no
Construction	not applicable
Accessory type	broadcast arm
Type of stand	broadcast stand
Type of stand base	not applicable

Weight and dimensions including packaging

Weight (incl. packaging)	2,3 kg
Dimensions (incl. packaging)	100,5 x 18,5 x 9,5 cm

Product specifications

broadcasting microphone arm
compatible with most condenser microphones
male XLR to female XLR version
fully aluminium housing and high-quality hinges
ideal for fixed microphone positioning
stand dimensions:
- upper arm: 490mm
- lower arm: 460mm
cable length: 5m
included:
- mounting hardware
- desktop base
- desk clamp

Paul Johnson 26 December 2024

Wrote the following about Shure SM7dB Dynamic Studio Microphone with Built-in Preamp

I have three ordinary SM7B's and they all have preamps of one type or another, so when I needed one more, I thought I'd try this new version. As far as I can see and hear, it's the same familiar sound, so just very convenient to have it as one unit - to save the faffing with a cloudlifter. I'm very happy, and as the preamp is switchable - makes setup very easy!

Jeff C. 23 October 2021

Wrote the following about Innox IVA08 XLR Pro Broadcast Microphone Stand

We bought one of these for our on-air studio (https://2xs.rocks/content/studios.html, there's a pic there)), and it is extremely solid, well-made and - quiet! Just about to buy another - so it must be good! Great service by Bax-Shop, btw, after our delivery got messed-up through no fault of theirs, or ours. Re-delivered within 48 hrs.

Jari L. 19 January 2021

Wrote the following about Innox IVA08 XLR Pro Broadcast Microphone Stand

This was probably bargain of the year! I bought this a couple of months ago, and have been using it in a busy studio with large AKG mics.

No noise, sturdy, stays in one place, smooth movements.

Sorry Rode, this runs circles around your 2x more expensive stand!

Reviews from other countries

Translate all reviews into English View original reviews

R van den B. 14 March 2025

Wrote the following about Shure SM7dB Dynamic Studio Microphone with Built-in Preamp

Eerdte ervaringen zijn goed!!! Hele fijne sound en multi inzetbaar.

Remco 31 January 2025

Wrote the following about Innox IVA08 XLR Pro Broadcast Microphone Stand

Zeer mooi en statief. Had zelf goedkope maar die trekken zo snel krom bij schroefdraad . Wat nog mooier is dat je deze met bijgeleverde mount ook op je bureau kan . Is zeer robuust en sterk . Makkelijk te verplaatsen naar je mond en ingebouwde stekker is ook zeer mooi . Zou deze zeker aanbevelen

Peter vd Putte 3 January 2025

Wrote the following about Innox IVA08 XLR Pro Broadcast Microphone Stand

zeer stevig statief, professionele uitstraling

Allisha 6 December 2024

Wrote the following about Shure SM7dB Dynamic Studio Microphone with Built-in Preamp

Al jaren gebruik ik de RODE NTK microfoon. Ik hou van het geluid, maar ik miste afwisseling in de sound. Zo wilde ik graag een wat donkerder/warmer geluid creëren. Hierdoor ging ik op zoek naar een microfoon die hierbij aansluit en kwam ik in eerste instantie uit op de Shure SM7B. Echter, ik kwam erachter dat je er een cloudlifter bij moet kopen om er een degelijk volume uit te halen (prijzig ding ook, dus dat geld haal je eruit als je de SM7db neemt), dus die optie viel af. Toen zag ik dat er een opvolger was: de Shure SM7db waarbij er een ingebouwde pre-amp is. Helemaal top! Dit in combinatie met 48V (die bijv in de Audient id4 zit), is het volume helemaal priem! De reden dat ik het nu 4 sterren geef in plaats van 5, is omdat ik de microfoon nog niet veelvuldig heb kunnen gebruiken (ik heb de microfoon nu een week) en omdat de pop filter van de microfoon een deuk had, direct uit de doos. In de loop van de week is deze wel langzaam minder geworden, maar nog steeds aanwezig.

Max M. 2 September 2024

Wrote the following about Innox IVA08 XLR Pro Broadcast Microphone Stand

stevige statief, de geintegreerde kabel is ideaal

Marco 5 December 2023

Wrote the following about Devine MicCon XLR to USB Interface

Ik kan er via software audacity ingesproken of gezongen tekst mee opnemen en afspelen.
Het was eigenlijk mijn bedoeling om via dit toestel mijn pc als luidspreker van mijn microfoon te gebruiken. Dat is me tot nog toe helaas nog niet gelukt.

Jay T 17 November 2023

Wrote the following about Innox IVA08 XLR Pro Broadcast Microphone Stand

Very solid, proper build.
I use it with a 1.4kg heavy Rode NT2A and sm-6 shockmount.
I have been looking at many other models, including Rode's PS1A+ but none can handle the weight.
No problem for the innox IVA08 !

Show all 40 reviews