Mackie Thump12 v4 active loudspeaker

no reviews yet

Bargain Buy

Specifications

Product features

Number of stereo AUX inputs: 1
Playback options: Bluetooth
Bluetooth: Yes
Mid driver/woofer diameter: 12 inches
Tweeter diameter: 1 inch
DSP: Basic DSP presets
Sustainable product: Not specified
Suitable as monitor: Yes
Weight per speaker: 13 kg
Total guitar/bass inputs: None
Total line inputs: 2
Total microphone inputs: 1
Built-in equaliser: No
Speaker cabinet material: Plastic
Maximum SPL: 120 dB - 129 dB
Maximum frequency: 20 - 20.9 kHz
Minimum frequency: 35 - 39 Hz
Mounting points: M10 screw thread
RMS power in watts: 750 - 1,499 W
Analogue audio input type: Balanced line in (TRS jack), balanced line in (XLR)
Analogue audio output type: Balanced line out (XLR)
Passive speaker output: No

Weight and dimensions including packaging

Weight: 12,5 kg
Dimensions: 67,5 x 41,0 x 41,0 cm

Product specifications

Product type: active full-range loudspeaker
Suitable for: PA, DJ, floor monitor (wedge), fixed installation
System: 2-way, bi-amped
Frequency response (-10 dB): 39 Hz – 20 kHz
Frequency response (-3 dB): 47 Hz – 20 kHz
Maximum SPL (peak): 129 dB
horizontal dispersion (-6 dB): 90°
Vertical dispersion (-6 dB): 50°
monitor angle: 40°
woofer: 12-inch (305 mm) with ferrite magnet
HF driver: 1-inch (25 mm) heat-resistant polymer compression driver
amplifier:
- type: Class D
- Total power: 1400 W peak
- LF power: 1,200 W peak / 320 W RMS
- HF power: 200 W peak / 180 W RMS
- THD: < 1%
- cooling: convection
Crossover frequency: 1.8 kHz
DSP: SoundCheck DSP
Voicing modes: Flat, DJ, Live, Wedge
outdoor mode
music ducking (channel 2 is attenuated by 15 dB when a microphone signal is present on channel 1)
feedback eliminator with up to 6 automatic notch filters (on channel 1)
mic/line switch on channel 1
Inputs:
- 2x XLR/6.3 mm TRS jack combo (mic/line, balanced)
- 1x 3.5 mm TRS jack (line, channel 2)
- Bluetooth
Input impedance: 10 kΩ balanced
Output: 1x XLR male (mix out, balanced, 150 Ω) for loop-through or subwoofer
Bluetooth: version 5.0, for audio streaming and control
wireless pairing of two speakers (stereo or zone via app)
App: Thump Connect 2 (2-band EQ, volume and mute control)
Protection: peak and RMS limiting, thermal protection for power supply and amplifier, subsonic filter
indicator LEDs: voicing mode, outdoor mode, music ducking, feedback eliminator, front LED, Bluetooth, link, signal/overload
Switchable front-panel LED
Mounting: floor, stand flange (bottom), 3x M10 flying points
metal handles
Operating temperature: 0 – 45 °C
Power supply: 100–240 V, 50–60 Hz, 300 W, via 3-pin IEC connector
dimensions (h x w x d): 620 x 356 x 356 mm
weight: 12.5 kg
included: mains lead
Available separately:
- Mackie Thump12 v4 speaker cover
- Mackie Thump12 v4 speaker case with wheels
- Mackie T100 speaker stand
- Mackie SPM400 M20 spacer tube
- Mackie PA-A3 eye bolt set (3x M10 x 17 mm)

Choose your variant – Mid driver/woofer diameter: 12 inches

Recommended price £435 -16%

£366 incl. 20% VAT

Online stock status: In stock

Order before 10:00pm = receive it on Thursday (free)

Only 1 piece in stock in our warehouse

B-Stock from £357

🔥HOT & NEW

Choose the Aftercare Package £18.30 one-time fee

Add to Basket

Compare

Wishlist

2x Mackie Thump12 v4

Recommended price: £732
Now as combination for: £717
You save: £15

Add to Basket

Order now and receive delivery within approx. 15 business days

Ordered before 10pm: Delivered in 2 Working Days (if in stock)

Free delivery from £50

Lowest Price Guarantee

Free Returns

3-Year Warranty

30-Day Trial Period

Specifications

Product features

Number of stereo AUX inputs: 1
Playback options: Bluetooth
Bluetooth: Yes
Mid driver/woofer diameter: 12 inches
Tweeter diameter: 1 inch
DSP: Basic DSP presets
Sustainable product: Not specified
Suitable as monitor: Yes
Weight per speaker: 13 kg
Total guitar/bass inputs: None
Total line inputs: 2
Total microphone inputs: 1
Built-in equaliser: No
Speaker cabinet material: Plastic
Maximum SPL: 120 dB - 129 dB
Maximum frequency: 20 - 20.9 kHz
Minimum frequency: 35 - 39 Hz
Mounting points: M10 screw thread
RMS power in watts: 750 - 1,499 W
Analogue audio input type: Balanced line in (TRS jack), balanced line in (XLR)
Analogue audio output type: Balanced line out (XLR)
Passive speaker output: No

Weight and dimensions including packaging

Weight: 12,5 kg
Dimensions: 67,5 x 41,0 x 41,0 cm

Product specifications

Product type: active full-range loudspeaker
Suitable for: PA, DJ, floor monitor (wedge), fixed installation
System: 2-way, bi-amped
Frequency response (-10 dB): 39 Hz – 20 kHz
Frequency response (-3 dB): 47 Hz – 20 kHz
Maximum SPL (peak): 129 dB
horizontal dispersion (-6 dB): 90°
Vertical dispersion (-6 dB): 50°
monitor angle: 40°
woofer: 12-inch (305 mm) with ferrite magnet
HF driver: 1-inch (25 mm) heat-resistant polymer compression driver
amplifier:
- type: Class D
- Total power: 1400 W peak
- LF power: 1,200 W peak / 320 W RMS
- HF power: 200 W peak / 180 W RMS
- THD: < 1%
- cooling: convection
Crossover frequency: 1.8 kHz
DSP: SoundCheck DSP
Voicing modes: Flat, DJ, Live, Wedge
outdoor mode
music ducking (channel 2 is attenuated by 15 dB when a microphone signal is present on channel 1)
feedback eliminator with up to 6 automatic notch filters (on channel 1)
mic/line switch on channel 1
Inputs:
- 2x XLR/6.3 mm TRS jack combo (mic/line, balanced)
- 1x 3.5 mm TRS jack (line, channel 2)
- Bluetooth
Input impedance: 10 kΩ balanced
Output: 1x XLR male (mix out, balanced, 150 Ω) for loop-through or subwoofer
Bluetooth: version 5.0, for audio streaming and control
wireless pairing of two speakers (stereo or zone via app)
App: Thump Connect 2 (2-band EQ, volume and mute control)
Protection: peak and RMS limiting, thermal protection for power supply and amplifier, subsonic filter
indicator LEDs: voicing mode, outdoor mode, music ducking, feedback eliminator, front LED, Bluetooth, link, signal/overload
Switchable front-panel LED
Mounting: floor, stand flange (bottom), 3x M10 flying points
metal handles
Operating temperature: 0 – 45 °C
Power supply: 100–240 V, 50–60 Hz, 300 W, via 3-pin IEC connector
dimensions (h x w x d): 620 x 356 x 356 mm
weight: 12.5 kg
included: mains lead
Available separately:
- Mackie Thump12 v4 speaker cover
- Mackie Thump12 v4 speaker case with wheels
- Mackie T100 speaker stand
- Mackie SPM400 M20 spacer tube
- Mackie PA-A3 eye bolt set (3x M10 x 17 mm)

Product information

Product no: 9000-0152-6115

General

Are you a musician? A DJ? Or are you part of a band? To avoid being completely dependent on the stage where you perform - if any - you invest in your own PA system. And then, of course, you want it to sound good, and to impress in terms of loudness too. With those qualifications in mind, we would like to point to the Mackie Thump12 v4 active loudspeaker. With 129 dB SPL, the loudness is certainly good. In terms of bass too, there's nothing to complain about: 39 Hz. If you want more low-end, you can always consider the larger Thump15 v4, or a separate Thump subwoofer. For the bands: 't is not only a good PA speaker for your audience, but also for the band itself. In fact, this monitor can be used on its side as a stage monitor. In addition, this monitor offers various sound profiles, e.g. DJ and neutral, and bluetooth streaming is possible. Especially at this price, it is a formidable competitor in the stage world!