Based on more than 21,240 customer reviews

Mackie Thump15 v4 active loudspeaker

5 / 5
Bargain Buy
Mackie Thump15 v4 active loudspeaker

Specifications

Product features

Number of stereo AUX inputs
1
Playback options
Bluetooth
Bluetooth
Yes
Mid driver/woofer diameter
15 inches
Tweeter diameter
1 inch
DSP
Basic DSP presets
Sustainable product
Not specified
Suitable as monitor
Yes
Weight per speaker
15 kg
Total guitar/bass inputs
None
Total line inputs
2
Total microphone inputs
1
Built-in equaliser
No
Speaker cabinet material
Plastic
Maximum SPL
130 dB - 139 dB
Maximum frequency
20 - 20.9 kHz
Minimum frequency
30 - 34 Hz
Mounting points
M10 screw thread
RMS power in watts
750 - 1,499 W
Analogue audio input type
Balanced line in (TRS jack), balanced line in (XLR)
Analogue audio output type
Balanced line out (XLR)
Passive speaker output
No

Weight and dimensions including packaging

Weight
17,0 kg
Dimensions
74,0 x 48,0 x 41,0 cm

Product specifications

  • Product type: active full-range loudspeaker
  • Suitable for: PA, DJ, stage monitor (wedge) and fixed installation
  • Frequency response (-10 dB): 34 Hz – 20 kHz
  • Frequency response (-3 dB): 41 Hz – 20 kHz
  • Maximum SPL (peak): 130 dB
  • Coverage (-6 dB): 90° horizontal x 50° vertical
  • monitor angle: 40°
  • woofer: 15-inch (381 mm) with ferrite magnet
  • Tweeter: 1-inch (25 mm) heat-resistant polymer compression driver
  • amplifier: Class D, 1400 W peak total
    • bass: 1,200 W peak / 320 W RMS
    • High: 200 W peak / 180 W RMS
  • THD: <1%
  • Cooling: convection
  • crossover frequency: 1.8 kHz
  • Inputs: 2x XLR/6.3 mm TRS combo (balanced), 1x 3.5 mm TRS, Bluetooth
  • Input impedance: 10 kOhm balanced
  • Output: mix out, balanced male XLR (150 ohms)
  • mic/line switch on channel 1
  • Gain controls per channel and master volume
  • Bluetooth: version 5.0, for audio streaming and control via app
  • wireless pairing of two speakers (stereo or zone)
  • App: Thump Connect 2
  • SoundCheck DSP with 4 voicing modes: Flat, DJ, Live and Wedge
  • Outdoor Mode
  • Music Ducking (channel 2 is attenuated by 15 dB when a mic signal is present on channel 1)
  • Feedback Eliminator with up to 6 automatic notch filters (channel 1)
  • switchable front LED
  • indicator LEDs: voicing mode, outdoor mode, music ducking, feedback eliminator, front LED, Bluetooth status, link status, signal/overload
  • Protection: peak and RMS limiting, thermal protection for power supply and amplifier
  • metal handles
  • Mounting: floor, tripod via built-in flange or flying via 3x M10 suspension points
  • power supply: 100–240 V, 50–60 Hz, 350 W (IEC socket)
  • dimensions: 696 x 439 x 356 mm (h x w x d)
  • weight: 14.8 kg
  • Included: mains lead
  • Available separately: speaker cover, speaker cover with wheels, T100 stand, SPM400 M20 connecting tube, PA-A3 eye bolt set (3x M10)

Choose your variant – Mid driver/woofer diameter: 15 inches

Recommended price £544 -16%
£458 incl. 20% VAT
Online stock status: In stock

Order before 10:00pm = receive it on Thursday (free)

Still 4 in stock in our warehouse

B-Stock from £446
🔥HOT & NEW
£22.90 one-time fee
Wishlist
Mackie Thump15 v4 active loudspeaker x2

2x Mackie Thump15 v4

Recommended price
£916
Now as combination for
£893
You save
£23
In stock

Order before 10:00pm = receive it on Thursday (free)

Specifications

Product features

Number of stereo AUX inputs
1
Playback options
Bluetooth
Bluetooth
Yes
Mid driver/woofer diameter
15 inches
Tweeter diameter
1 inch
DSP
Basic DSP presets
Sustainable product
Not specified
Suitable as monitor
Yes
Weight per speaker
15 kg
Total guitar/bass inputs
None
Total line inputs
2
Total microphone inputs
1
Built-in equaliser
No
Speaker cabinet material
Plastic
Maximum SPL
130 dB - 139 dB
Maximum frequency
20 - 20.9 kHz
Minimum frequency
30 - 34 Hz
Mounting points
M10 screw thread
RMS power in watts
750 - 1,499 W
Analogue audio input type
Balanced line in (TRS jack), balanced line in (XLR)
Analogue audio output type
Balanced line out (XLR)
Passive speaker output
No

Weight and dimensions including packaging

Weight
17,0 kg
Dimensions
74,0 x 48,0 x 41,0 cm

Product specifications

  • Product type: active full-range loudspeaker
  • Suitable for: PA, DJ, stage monitor (wedge) and fixed installation
  • Frequency response (-10 dB): 34 Hz – 20 kHz
  • Frequency response (-3 dB): 41 Hz – 20 kHz
  • Maximum SPL (peak): 130 dB
  • Coverage (-6 dB): 90° horizontal x 50° vertical
  • monitor angle: 40°
  • woofer: 15-inch (381 mm) with ferrite magnet
  • Tweeter: 1-inch (25 mm) heat-resistant polymer compression driver
  • amplifier: Class D, 1400 W peak total
    • bass: 1,200 W peak / 320 W RMS
    • High: 200 W peak / 180 W RMS
  • THD: <1%
  • Cooling: convection
  • crossover frequency: 1.8 kHz
  • Inputs: 2x XLR/6.3 mm TRS combo (balanced), 1x 3.5 mm TRS, Bluetooth
  • Input impedance: 10 kOhm balanced
  • Output: mix out, balanced male XLR (150 ohms)
  • mic/line switch on channel 1
  • Gain controls per channel and master volume
  • Bluetooth: version 5.0, for audio streaming and control via app
  • wireless pairing of two speakers (stereo or zone)
  • App: Thump Connect 2
  • SoundCheck DSP with 4 voicing modes: Flat, DJ, Live and Wedge
  • Outdoor Mode
  • Music Ducking (channel 2 is attenuated by 15 dB when a mic signal is present on channel 1)
  • Feedback Eliminator with up to 6 automatic notch filters (channel 1)
  • switchable front LED
  • indicator LEDs: voicing mode, outdoor mode, music ducking, feedback eliminator, front LED, Bluetooth status, link status, signal/overload
  • Protection: peak and RMS limiting, thermal protection for power supply and amplifier
  • metal handles
  • Mounting: floor, tripod via built-in flange or flying via 3x M10 suspension points
  • power supply: 100–240 V, 50–60 Hz, 350 W (IEC socket)
  • dimensions: 696 x 439 x 356 mm (h x w x d)
  • weight: 14.8 kg
  • Included: mains lead
  • Available separately: speaker cover, speaker cover with wheels, T100 stand, SPM400 M20 connecting tube, PA-A3 eye bolt set (3x M10)

Product information

Product no: 9000-0152-6116

General

If you don't want to take any risks as a band, musician or DJ, then get your own PA speakers. After all, then you know what you have, because you really won't be the first band to end up in some venue where the speakers there are to cry about. In short, go for your own PA system. The Mackie Thump15 v4 active speaker, for example, this really is a juggernaut in terms of performance. A cosy 130 dB SPL and a low-end of 34 Hz, this will get your feet off the floor. And if that's not enough: there are separate matching subs available in this series, you might like to combine them! Furthermore: a real workhorse, with practical features. For instance, this Thump can also be used on its side as a stage monitor. There are sound profiles - band and stage monitor, for instance. There is even bluetooth streaming, and for fixed installties, even M10 eyelets are present. All in all, a very interesting speaker, especially for this investment!

Bax Music Warranty This product comes with a 3-year warranty.

Reviews (1)

5.0
1 review

Rating

5 stars 1 4 stars 0 3 stars 0 2 stars 0 1 star 0

Reviews from other countries

5 / 5

Mackie Thump15 v4 active loudspeaker

Parfait, enceinte au top, manque caisson de basse pour les grosse salle
 | 
This review was automatically translated from French.

Videos

Downloads

Other people also bought

Package deal

2x Mackie Thump15 v4

Product no: 9000-0152-6841

Mackie Thump15 v4 active loudspeaker x2
Recommended price
£916
Now as combination for
£893
You save
£23
In stock

Order before 10:00pm = receive it on Thursday (free)

Other products from Mackie

Find all products of the brand Mackie

Alternative products by other brands

Search all products in category Active Full-Range Speaker
Compare your gear (1/10)