LD Systems STINGER 10 A G3 Active Full-Range Speaker

Number of stereo AUX inputs	none
Playback options	none
Bluetooth	no
Mid driver/woofer diameter	8 inches
Tweeter diameter	1 inch
DSP	basic DSP presets
Sustainable product	not specified
suitable as monitor	yes
Weight per speaker	10 kg
Total guitar/bass inputs	none
Total line inputs	2

Total microphone inputs	2
built-in equaliser	no
Speaker cabinet material	wood
maximum SPL	120 dB - 129 dB
maximum frequency	20 - 20.9 kHz
Minimum frequency	60 - 79 Hz
Mounting points	M10 screw thread, 35mm stand flange
RMS power in watts	200 - 349 W
Analogue audio input type	balanced line in (TRS jack), microphone input (XLR)
Analogue audio output type	balanced mix out (XLR)
passive speaker output	no

Number of stereo AUX inputs	1
Playback options	~
Bluetooth	~
Mid driver/woofer diameter	12 inches
Tweeter diameter	~
DSP	~
Sustainable product	~
suitable as monitor	~
Weight per speaker	20 kg
Total guitar/bass inputs	~
Total line inputs	~

Total microphone inputs	~
built-in equaliser	~
Speaker cabinet material	~
maximum SPL	130 dB - 139 dB
maximum frequency	~
Minimum frequency	50 - 59 Hz
Mounting points	~
RMS power in watts	500 - 749 W
Analogue audio input type	~
Analogue audio output type	~
passive speaker output	~

Number of stereo AUX inputs	~
Playback options	~
Bluetooth	~
Mid driver/woofer diameter	15 inches
Tweeter diameter	~
DSP	~
Sustainable product	~
suitable as monitor	~
Weight per speaker	27 kg
Total guitar/bass inputs	~
Total line inputs	~

Total microphone inputs	~
built-in equaliser	~
Speaker cabinet material	~
maximum SPL	~
maximum frequency	~
Minimum frequency	~
Mounting points	~
RMS power in watts	~
Analogue audio input type	~
Analogue audio output type	~
passive speaker output	~

LD Systems STINGER 10 A G3 Active Full-Range Speaker
Product no: 9000-0051-6563

Product information

General

The LD Systems STINGER 10 A G3 is a great active full-range speaker packed inside a compact housing and able to thrust 300 Watts RMS generated by a superb class D amplifier. Built using quality components, it's this basis that blesses the STINGER 10 A with deep bass response and despite its size, beautifully detailed mids and trebles. It's equipped with a wave guide developed according to BEM (Boundary Elements Method) standards to ensure that the risk of any reflections is greatly reduced while at the same time enhancing sound dispersion. Add that to the special DYNX DSP module for interference-free audio supervised by a multi-band limiter and you get a full-range speaker with full all-round capabilities.

Specifications

Product features

Sustainable product: Not specified
RMS power in watts: 200 - 349 W
Maximum SPL: 120 dB - 129 dB
Mid driver/woofer diameter: 10 inches
Tweeter diameter: 1 inch
Bluetooth: No
Playback options: None
Analogue audio output type: Balanced mix out (XLR)
Analogue audio input type: Balanced line in (TRS jack), microphone input (XLR)
Number of stereo AUX inputs: None
Total microphone inputs: 2
Total guitar/bass inputs: None
Total line inputs: 2
Passive speaker output: No
Minimum frequency: 60 - 79 Hz
Maximum frequency: 20 - 20.9 kHz
DSP: Basic DSP presets
Built-in equaliser: No
Suitable as monitor: Yes
Speaker cabinet material: Wood
Mounting points: M10 screw thread, 35mm stand flange
Weight per speaker: 13 kg

Weight and dimensions including packaging

Weight: 15,2 kg
Dimensions: 60,0 x 43,0 x 42,0 cm

Product specifications

LD Systems STINGER 10 A G3
active full-range speaker
low / mid driver size: 10-inch
woofer magnet: ferrite
woofer voice coil: 2-inch
horn: BEM
HF-driver size: 1 inch
HF-driver magnet: ferriet
HF driver voice coil: 1-inch
amplifier: Class-D
dispersion: 90 x 50 degrees
RMS power: 300 W
peak power: 600 W
frequency range: 65 Hz - 20,000 kHz
max. SPL (peak): 127 dB
thermal overload
input sensitivity: 9 dBu
controls: 2x gain, 2c mic / line, mode
indicators: limit, mic, mode, on, protect (safety circuit enabled), signal
line inputs: 2
line inputs connectors: : jack, XLR
line outputs: 1
line out connectors: XLR
operating voltage: 100 - 120V / 50 - 60 Hz OR 200 - 240V / 50 - 60 Hz (automatic switching), switching power supplies
operating temperature: 0 to 40 °C
relative humidity: <80% (none condensing)
cabinet material: 12mm plywood
cabinet coating: polyurea
cabinet construction: ventilated
dimensions: 325 x 527 x 318 mm
weight: 12.7 kg