AKG C214 microphone set
AKG
Specifications
Product features
- Sustainable product
- Not specified
- Microphone sensitivity (dBV/PA)
- -34
- Microphone impedance
- 200-249 ohms
- Low-cut filter
- Yes
- Maximum SPL
- 150 dB - 159 dB
- Maximum frequency
- 20 - 20.9 kHz
- Minimum frequency
- 20 - 21 Hz
- Pad switch
- Yes
- Polar pattern
- Cardioid
- Multi-pattern
- No
- Tube microphone
- No
- Stereo
- No
- Microphone accessories
- Shock mount, windshield, case
- Vintage microphone family
- Not applicable
- Microphone sound
- Clean/neutral
Weight and dimensions including packaging
- Weight
- 1,4 kg
- Dimensions
- 29,0 x 22,0 x 10,0 cm
Product specifications
- large-diaphragm microphone
- pickup pattern: cardioid
- operates on 48V phantom power supply
- frequency range: 20 Hz to 20 kHz
- maximum SPL: 156 dB
- sensitivity: 20 mV
- weight: 0.28 kg
- including: windscreen, storage case and anti-shock stand
Product features
- Pop filter mount
- Goose neck with stand mount
- Sustainable product
- Not specified
- Filter material
- Nylon
- Podcast bundle
- No
- Accessory type
- Popfilter
- Type of vlogging accessory
- Pop filter
Weight and dimensions including packaging
- Weight
- 200 gr
- Dimensions
- 37,5 x 19,0 x 6,0 cm
Product specifications
- pop filter with acoustic nylon
- shields the microphone from blasts of air that might cause auxiliary noises to end up in your recording
- acoustic nylon lets the intended sound through
- equipped with microphone stand clamp that can be mounted onto the beam
- microphone clamp with spring, can be tightened with a screw mechanism for optimal stability
- designed for condenser vocal microphones, but can also be used with dynamic vocal microphones
Product features
- Sustainable product
- Not specified
- Audio connector
- 3-pin XLR
- Length
- 3.00 m
- Colour
- Black
- Set
- No
- (partially) coiled
- No
- Right angled or straight
- Straight - straight
Weight and dimensions including packaging
- Weight
- 215 gr
- Dimensions
- 22,0 x 19,0 x 3,0 cm
Product specifications
- XLR male - XLR female
- can be used as a microphone cable or as an all-round signal cable
- flexible, strong cable
- Neutrik connectors, NC3MXX and NC3FXX
- connectors with pull relief to retain contact integrity
- length: 3m
- filling: cotton
- oxygen-free copper
- isolation diameter: 1.4mm
- isolation colours: red and white
- number of conductors: 2
- inner conductor diameter: 0.226mm²
- conductor dimensions: 20 x 0.12mm
- helical sheathing: 0.12 x 64
- cable diameter: 6mm
- sheathing material: flexible PVC
- operating temperature: -20 - +70°C
- capacity @ 1 kHz:
- cond.-cond.: 131pF/m
- cond.-shield.: 178pF/m
Product features
- Active noise suppression
- No
- Wireless
- No
- Rotatable earpad
- Yes
- Driver-diameter
- Niet gespecificeerd
- Sustainable product
- Not specified
- Gevoeligheid
- 110 - 114 dB
- Gewicht koptelefoon
- 250 - 299 g
- Headphone construction
- Closed
- Headphone impedance
- 50-74 ohms
- In/on/over ear
- Over-ear
- Includes microphone
- No
- Design can be folded/dismantled
- Yes
- Removable cable
- No
- Cable length
- > / = 300 cm
- Colour
- Black
- Maximum frequentie
- 25 - 26.9 kHz
- Minimum frequentie
- 5 - 9 Hz
- Podcast bundle
- No
- Type audio connector
- Jack 3.5 mm TRS, jack 6.3 mm TRS
- Accessory type
- Headphones
- Headphone design
- Modern
- Volume control
- No
Weight and dimensions including packaging
- Weight
- 586 gr
- Dimensions
- 25,0 x 19,5 x 8,5 cm
Product specifications
- closed, dynamic headphones
- frequency response: 8 – 25000 Hz
- impedance: 64 ohms
- attenuation: up to 32 dB
- max. SPL: 110 dB
- cord: ≥ 1.3 m coiled cable (can extend up to 3m) with stereo mini jack connector
- including jack adapter
- weight: 285 g
Product features
- Number of stands
- 1
- Sustainable product
- Not specified
- Microphone stand weight
- 0 - 1 kg
- Boom arm
- No
- Height adjustable
- Yes
- Colour
- Black
- Stand material
- Steel
- Maximum height of stand
- < 50 cm
- Included stand accessories
- None
- Mininum stand height
- 10 to 15 cm
- Podcast bundle
- No
- Screw thread size
- 3/8 inch, 5/8 inch
- Set
- No
- Construction
- 2-part telescopic
- Accessory type
- Microphone stand
- Type of stand
- Tabletop stand/tripod
- Type of stand base
- Base plate
- Type of vlogging accessory
- Microphone stand / clip
Weight and dimensions including packaging
- Weight
- 600 gr
- Dimensions
- 18,5 x 15,5 x 3,5 cm
Product specifications
- desktop microphone stand
- height: 145 to 230mm
- stable, metal base
- base finished with rubber pads for improved grip and to prevent scratching
- microphone clip adapter included (⅜ inch to ⅝ inch)
Specifications
Product features
- Sustainable product
- Not specified
- Microphone sensitivity (dBV/PA)
- -34
- Microphone impedance
- 200-249 ohms
- Low-cut filter
- Yes
- Maximum SPL
- 150 dB - 159 dB
- Maximum frequency
- 20 - 20.9 kHz
- Minimum frequency
- 20 - 21 Hz
- Pad switch
- Yes
- Polar pattern
- Cardioid
- Multi-pattern
- No
- Tube microphone
- No
- Stereo
- No
- Microphone accessories
- Shock mount, windshield, case
- Vintage microphone family
- Not applicable
- Microphone sound
- Clean/neutral
Weight and dimensions including packaging
- Weight
- 1,4 kg
- Dimensions
- 29,0 x 22,0 x 10,0 cm
Product specifications
- large-diaphragm microphone
- pickup pattern: cardioid
- operates on 48V phantom power supply
- frequency range: 20 Hz to 20 kHz
- maximum SPL: 156 dB
- sensitivity: 20 mV
- weight: 0.28 kg
- including: windscreen, storage case and anti-shock stand
Product features
- Pop filter mount
- Goose neck with stand mount
- Sustainable product
- Not specified
- Filter material
- Nylon
- Podcast bundle
- No
- Accessory type
- Popfilter
- Type of vlogging accessory
- Pop filter
Weight and dimensions including packaging
- Weight
- 200 gr
- Dimensions
- 37,5 x 19,0 x 6,0 cm
Product specifications
- pop filter with acoustic nylon
- shields the microphone from blasts of air that might cause auxiliary noises to end up in your recording
- acoustic nylon lets the intended sound through
- equipped with microphone stand clamp that can be mounted onto the beam
- microphone clamp with spring, can be tightened with a screw mechanism for optimal stability
- designed for condenser vocal microphones, but can also be used with dynamic vocal microphones
Product features
- Sustainable product
- Not specified
- Audio connector
- 3-pin XLR
- Length
- 3.00 m
- Colour
- Black
- Set
- No
- (partially) coiled
- No
- Right angled or straight
- Straight - straight
Weight and dimensions including packaging
- Weight
- 215 gr
- Dimensions
- 22,0 x 19,0 x 3,0 cm
Product specifications
- XLR male - XLR female
- can be used as a microphone cable or as an all-round signal cable
- flexible, strong cable
- Neutrik connectors, NC3MXX and NC3FXX
- connectors with pull relief to retain contact integrity
- length: 3m
- filling: cotton
- oxygen-free copper
- isolation diameter: 1.4mm
- isolation colours: red and white
- number of conductors: 2
- inner conductor diameter: 0.226mm²
- conductor dimensions: 20 x 0.12mm
- helical sheathing: 0.12 x 64
- cable diameter: 6mm
- sheathing material: flexible PVC
- operating temperature: -20 - +70°C
- capacity @ 1 kHz:
- cond.-cond.: 131pF/m
- cond.-shield.: 178pF/m
Product features
- Active noise suppression
- No
- Wireless
- No
- Rotatable earpad
- Yes
- Driver-diameter
- Niet gespecificeerd
- Sustainable product
- Not specified
- Gevoeligheid
- 110 - 114 dB
- Gewicht koptelefoon
- 250 - 299 g
- Headphone construction
- Closed
- Headphone impedance
- 50-74 ohms
- In/on/over ear
- Over-ear
- Includes microphone
- No
- Design can be folded/dismantled
- Yes
- Removable cable
- No
- Cable length
- > / = 300 cm
- Colour
- Black
- Maximum frequentie
- 25 - 26.9 kHz
- Minimum frequentie
- 5 - 9 Hz
- Podcast bundle
- No
- Type audio connector
- Jack 3.5 mm TRS, jack 6.3 mm TRS
- Accessory type
- Headphones
- Headphone design
- Modern
- Volume control
- No
Weight and dimensions including packaging
- Weight
- 586 gr
- Dimensions
- 25,0 x 19,5 x 8,5 cm
Product specifications
- closed, dynamic headphones
- frequency response: 8 – 25000 Hz
- impedance: 64 ohms
- attenuation: up to 32 dB
- max. SPL: 110 dB
- cord: ≥ 1.3 m coiled cable (can extend up to 3m) with stereo mini jack connector
- including jack adapter
- weight: 285 g
Product features
- Number of stands
- 1
- Sustainable product
- Not specified
- Microphone stand weight
- 0 - 1 kg
- Boom arm
- No
- Height adjustable
- Yes
- Colour
- Black
- Stand material
- Steel
- Maximum height of stand
- < 50 cm
- Included stand accessories
- None
- Mininum stand height
- 10 to 15 cm
- Podcast bundle
- No
- Screw thread size
- 3/8 inch, 5/8 inch
- Set
- No
- Construction
- 2-part telescopic
- Accessory type
- Microphone stand
- Type of stand
- Tabletop stand/tripod
- Type of stand base
- Base plate
- Type of vlogging accessory
- Microphone stand / clip
Weight and dimensions including packaging
- Weight
- 600 gr
- Dimensions
- 18,5 x 15,5 x 3,5 cm
Product specifications
- desktop microphone stand
- height: 145 to 230mm
- stable, metal base
- base finished with rubber pads for improved grip and to prevent scratching
- microphone clip adapter included (⅜ inch to ⅝ inch)
Product information
Product no: 9000-0154-1887
General
Most people who have a recording studio know how difficult it is to make the choices about what to buy. The hardest two choices are picking a studio mixer and, of course, the microphone. The microphone is the source of everything that happens in the studio and therefore it does need to be of good quality. And that it is quality is obvious. AKG is not quick to stamp its brand on a product. Its vast experience ensures that every microphone that leaves the factory is approved and complies with very strict regulations. The sound of the AKG Perception C214 is very clean. Every recording will sound as the recorded source sounds - hardly 'coloured' at all, in other words. The cardioid directivity ensures that ambient noise barely plays a role during recording and that the focus is completely on the source to be recorded.
Service promise
AKG C214 cardioid studio condenser microphone This product comes with a 3-year warranty.
This product comes with a 3-year warranty.
Devine SPS 100 Pop Filter This product comes with a manufacturing defects warranty.
This product comes with a manufacturing defects warranty.
Devine MIC500N/3 XLR Microphone and Signal Cable with Neutrik Connectors, 3m This product comes with a 3-year warranty.
This product comes with a 3-year warranty.
Sennheiser HD 280 PRO Headphones This product comes with a 3-year warranty.
This product comes with a 3-year warranty.
Innox IVA 06 Desktop Microphone Stand This product comes with a 3-year warranty.
This product comes with a 3-year warranty.
Reviews (315)
Rating
Sennheiser HD 280 PRO Headphones
Sennheiser HD 280 PRO Headphones
Reviews from other countries
Devine SPS 100 Pop Filter
Devine SPS 100 Pop Filter
Verder handig dat er een schroef in de klem zit, op deze manier blijft de opfilter zitten. Al zorgt dit er wel voor dat het iets meer moeite is om hem te verplaatsen. Maar gelukkig kan je de filter ombuigen naar een andere positie.
Sennheiser HD 280 PRO Headphones
Hiervoor had ik de AKG K240 besteld, maar die bleek voor mij niet comfortabel te zitten. Daarom heb ik deze omgeruild voor de Sennheiser HD 280 Pro, en daar heb ik geen moment spijt van gehad.
De geluidsisolatie is uitstekend, waardoor omgevingsgeluid goed wordt buitengesloten. Dat maakt hem ideaal om ongestoord te oefenen. Ook tijdens langere sessies blijft hij comfortabel zitten, zonder vervelende druk op mijn hoofd of oren.
Het enige kleine minpuntje vind ik het krulsnoer; persoonlijk geef ik de voorkeur aan een recht snoer. Maar dat weegt absoluut niet op tegen de uitstekende geluidskwaliteit, het draagcomfort en de prijs-kwaliteitverhouding.
Kortom: een uitstekende hoofdtelefoon die wat mij betreft de volle 5 sterren verdient!
Sennheiser HD 280 PRO Headphones
Sennheiser HD 280 PRO Headphones
Innox IVA 06 Desktop Microphone Stand
Devine SPS 100 Pop Filter
Downloads
Other people also bought
-
PopularRecommended price £33 £26In stock Order now = receive it on Thursday
-
PopularRecommended price £22 £16.70In stock Order now = receive it on Thursday
-
Popular -25%Recommended price £57 £43In stock Order now = receive it on Thursday
-
Popular -27%Recommended price £66 £48In stock Order now = receive it on Thursday
Other products from AKG
Find all products of the brand AKG-
Bargain Buy -43%Recommended price £943 £539In stock Order now = receive it on Thursday (free)
-
Bargain Buy -47%Recommended price £444 £235In stock Order now = receive it on Thursday (free)
-
Bargain Buy -37%Recommended price £305 £193In stock Order now = receive it on Thursday (free)
-
Bargain Buy -38%Recommended price £248 £153In stock Order now = receive it on Thursday (free)
Alternative products by other brands
Search all products in category Large-Diaphragm Condenser Microphones-
Bargain Buy -24%Recommended price £695 £531In stock Order now = receive it on Thursday (free)
-
Popular -21%Recommended price £747 £589In stock Order now = receive it on Thursday (free)
-
Bargain Buy -33%Recommended price £425 £285In stock Order now = receive it on Thursday (free)
-
Popular -33%Recommended price £236 £159In stock Order now = receive it on Thursday (free)
Related products from AKG
Find all products from the brand AKG in the category Large-Diaphragm Condenser Microphones-
Bargain Buy -43%Recommended price £943 £539In stock Order now = receive it on Thursday (free)
-
Bargain Buy -16%Recommended price £237 £199In stock Order now = receive it on Thursday (free)