As flexible as it gets, the Shure Motiv MV7+ broadcast microphone features both an XLR port for connection to a mixer or audio interface and a USB-C port so it can just easily hooked up to a computer. This mic also features an on-board DSP processor.
Oplaadbare Shure SB901A lithium-ion accu voor Shure Microflex Wireless systemen, ideaal als reserve of vervanging voor lange vergadersessies.
Shure has revived the Beta 91, and made it even better! The Beta 91a may look the same, but it has received some substantial technological improvements for even better audio reproduction than its predecessor.
Digital wireless system with the legendary SM58 microphone for clear sound reproduction.
The Shure BLX2/SM58 handheld microphone is a superb wireless solution for clean speech and vocals. It runs on two AA batteries and operates on the UHF frequency band.
Fully protect the Shure MOTIV MV88 iOS microphone from wind noise on location with the tailor-made Shure AMV88-FUR Windjammer. This efficient recording tool was developed in collaboration with Rycote.
Digital wireless microphone with Beta 58A for crystal-clear audio.
You can't start your podcast or home studio any better than with this Shure SM58 LCE bundle. With the included table stand, you'll always have your hands free. The cable and windshield are not missing either.
To the Shure SM58 SE you have a jack of a microphone. A legend on stage but it also comes in handy in your podcast studio. We've also included a tripod, a cable and a windscreen.
There's a lot involved in making a podcast. That's why we created this bundle for you. The showpiece is the Shure Beta58a. You put this microphone firmly on the table with the included stand. Incl. cable and windscreen.
Looking for a means to attach your Shure RPM400 preamp to something other than your belt? The SHure RPM40PREMNT lets you attach this preamp wherever you want!
Shure introduces a dual diaphragm with this QLXD2K8B transmitter, and in doing so, they also have a world first. This wireless transmitter for the QLX-D wireless system possesses the impressive KSM8 microphone module.
This is a set of three cardioid condenser microphones, which is perfect for loud instruments such as drums. Their flexible goosenecks allow you to optimally position these mics.
With the compact Beta 181BI you'll be able to make high-quality bidirectional recordings. It is the ideal microphone to place between two instruments. This small microphone has a small diaphragm, but great power!
Looking for an easy way of wirelessly amplifying your instrument? The Shure BLX14 - Beta 98H/C allows you to do just that. It consists of a compact receiver, a bodypack transmitter and an instrument microphone.
Do you want to connect a line level output to a microphone input without damaging it? In that case, you should use this attenuator, which reduces the audio level by 50 dB.
The MX391 has been specially developed for spaces like the conference room, meeting room, or courtroom. Available in various colours and with different pickup patterns for ultimate flexibility.
The Shure WA411 is a spare part for the Shure TL45 tie microphone, specifically the LEMO connector. The WA411 is suitable for cables with a diameter of 1.1 millimetres.
This loose Shure WA416 connector covers the LEMO(3) microphone connector used on the Shure TL46, TL47 and Shure TL48 tie-pin microphones. The WA416 is also suitable for other 1.6 mm thick cables.
The Shure WA435 is a loose 5-pin MTQG (TA5F for Lectrosonics) Connector Kit that allows you to attach a TA5F connector to your TwinPlex tie-pipe microphone.
The Shure WA445 refers to a threaded collar, a spare part for the WA430 and WA435 Connector Kits.
The Shure MD40TA5F is a handy adapter, equipped with a Microdot to TA5F reducer for Shure bell packs and similar equipment.
The Shure RPM400LEMO is a wired microphone preamplifier with an adapter from LEMO3 to XLR connector. This preamplifier is suitable for all Shure TwinPlex microphones such as the TL45, 46, 47, 48 and TH53 headsets.
The Shure RPM400LEMO is a wired microphone preamplifier with an adapter from TQG to XLR connector. This preamplifier is suitable for all Shure TwinPlex microphones such as the TL45, 46, 47, 48 and TH53 headsets.
Looking for the flattest possible microphone response for your Shure TwinPlex TH45, 46, 47 or TH53 tie and head microphone(s)? With the Shure RPM40FC, you have a handy set of 10 Flat Caps suitable for this purpose.
The Shure RPM40KIT is a handy, all-in-one accessory kit for your Shure TwinPlex TL microphones. This kit comes with frequency caps, clamps, mounts, windshields, stickers and a storage bag!
To mount a single Shure TwinPlex TL microphone, you can use this Shure Magnet Mount set. This set consists of 2 pieces.
For outdoor use of the Shure TwinPlex tie-pin microphones, a professional windjammer is definitely recommended. In cooperation with Rycote, Shure therefore offers this Mini Windjammer set, with 2 windshields!
With the Shure RPM40PC, it is possible to simply adjust the frequency response of your Shure TwinPlex microphone such that your voice has more presence in recordings and in sound reinforcement.
The Shure RPM40SM consists of 3 transparent Sticky Mounts, including adhesive. These allow you to mount your Shure TwinPlex tie-pin microphone anywhere you want!
The Shure RPM40SO is a kit consisting of 10 Standoffs for RPM40(S)TC Dual and Single tie pin clips. This kit is suitable for all TL40 lavalier microphones.
To clamp a single Shure TwinPlex TL40 tie-piping microphone, use a Shure RPM40STC tie-piping clamp. This is a set consisting of three tie pin clamps.
To clamp a single Shure TwinPlex TL40 tie-pipe microphone, use a Shure RPM40STC tie-pipe clamp. This is a set consisting of three tie pin clamps.
You can use Shure's Vampire Sticky Mounts to attach your TwinPlex TL40 or similar tie-pin microphones. This is a set of 3 Vampire Sticky Mounts.
To attach two Shure TwinPlex TL40 or similar lavaliers to your lapel, use the Shure RPM40TC Dual tie pin clamps. This is a set consisting of three clamps.
Filters