The passive Radial JD6 is a meaty six-channel DI box and comes fully equipped to serve as a solid touring or studio tool.
The Radial DiNET DAN-RX2 is a 2-channel Dante network receiver and thus the counterpart of the DAN-TX2. This 'converter' allows you to convert both Dante- and AES67-compatible networks to analogue.
The passive Radial ProAV2 stereo multimedia DI box is fully set up to support instruments, media players, smartphones, and laptops.
The Hosa SideKick DIB-445 is a phantom-powered active DI box that keeps your instrument signal stable over long cables. With comprehensive controls to quickly solve hum or phase problems.
The DAP ADI-200 is an active DI box that can properly amplify line signals from sound sources such as guitars, keyboards and synthesisers with low noise levels.
The DAP SDI-202 is a multifunctional active stereo DI box. It has a special instrument mode that lets you effortlessly connect an electric guitar.
The Neutrik NA2M D2B mini-transformer converts unbalanced signals into balanced signals and can used for passive DI applications that require no earth or gain switching.
A compact DI that transforms your unbalanced signals into balanced signals. A handy clip allows you to attach the DI close to your guitar, keeping the unbalanced cable as short as possible.
The Neutrik NA2M D0B TX mini-transformer turns unbalanced signals into balanced signals and serves passive DI purposes when no earth or gain-switching is required.
The Palmer PAN16 8-Channel DI Box has a passive design wrapped in a 19 inch, 1U rack unit designed for demanding and professional audio rigs.
The Koch Loadbox II (4 ohm version) is an attenuator, loadbox, speaker simulator and DI-Box in one. Turn your tube-amp full open and direct the sound at a pleasant sound level to cabinet(s), mixer or headphones.
Giving you the perks of an active DI and a line isolator, the Palmer BRIDGE 4A+ is a remarkably practical and versatile bit of kit for both musicians and sound techs.
Radial Direct boxes are already known for their high-performance and ability to delivery clean and clear signal quality and here, the ProAV1 Mono passive direct box has been specially designed for audiovisual setups.
Supplying an essential gigging tool, the Palmer PAN 01 Passive DI Box guarantees impeccable signal conversion and transmission. Precision engineered, this box boasts flexible, reliable and professional performance.
The Palmer PAN 03 PASS has been designed for pro-level audio management in live and studio settings. This 4-channel passive DI box has individual jack inputs and parallel outputs.
The Radial StageBug SB-4 has been specifically designed for acoustic instruments that are equipped with a passive piezo pickup, like violins, mandolins and cellos.
The new version of the Radial JDI Duplex stereo DI box is the successor to the MK2. It is more compact, fitted with a 3.5mm stereo input for laptops and tablets and can also be mounted into a rack.
The advanced Palmer PAN 02 DI Box can be run on a 9 Volt battery or 48 Volt phantom power, upping the flexibility no matter where you're working.
The LD Systems LDI02 offers reliable performance at a reasonable price. This active DI box spans a wide frequency range and features a ground lift switch so you can avoid that unwanted hum.
A stage-rig essential, the Palmer BRIDGE 4P Passive DI Box harnesses a set of high-quality transformers that simply send the sound of guitars, basses and keyboards to the desk, noise-free and without any loss of tone.
Bringing simplicity and high-performance, the Palmer RIVER Havel DI Box has been designed for musicians and audio professionals who demand a pure signal, free of any tonal distortion.
The Palmer RIVER Series Mosel is an indispensable tool for musicians and audio professionals who demand maximum sound and signal quality.
The Palmer BRIDGE 4A has been designed for long-distance signal travel without noise or loss of tone, making it ideal for instruments like guitars, basses and keyboards.
The Palmer RIVER Naab DI Box features a two-channel design that's been specifically set up to solve the issues involved with hooking up laptops to PA systems.
Pre-equipped with a PAD switch and ground-lift switch, the Palmer River Series Wipper passive DI box ensures that the sound of unbalanced instruments are sent to the mixer or audio interface in pristine condition.
Play around with four sonic colours courtesy of the Palmer Ilm passive speaker simulator. Hook the speaker output of your amp up to the input, prevent clipping via the onboard attenuator and plug in a speaker cab via the thru output.
If it's good enough for Joe Bonamassa, then definitely for your applications. The guitarist has partnered with Palmer in the creation of the PDI03 JB speaker simulator and DI, with a bunch of cool features.
Of course you can stack two DI boxes on top of each other and connect them to your keyboard, but an even better idea is the Mackie MDB-2P, which includes -15 dB pad and ground/lift.
Setting a new standard when it comes to flexibility and functionality, the Palmer PAN 04 2-Channel DI Box has a passive design, basically setting you up with two PAN-01 passive boxes in one neat package.
The LR Baggs Para Acoustic D.I. is a studio-quality direct box with a 5-band EQ for acoustic guitar. It has notch and mid-range knobs, adjustable gain and phase inversion and can produce a very transparent sound.
With the Dual RDB, ART presents a crazy-useful studio tool. This Reamp DI box can take a clean vocal or guitar track and re-send it through effects processors, pedals and amps before re-recording.
Do you have an active instrument you'd like to plug in directly? Then the Mackie MDB-1A is the DI box you've been looking for. This active box gives plenty of headroom due to its active circuitry, resulting in virtually no clipping.
The DI box is an essential tool both on stage and in the studio, and the MDB-1P by Mackie is engineered especially for bass guitar. It boasts a -15 dB pad switch and high outputs that aren't susceptible to clipping!
The Tech 21 SansAmp Bass Driver D.I. Programmable is an extensive D.I. box/preamp with the same controls as the popular Bass Driver DI. However, the Programmable features 3 footswitches to quickly change presets!
Maybe you only want your DI box to serve as a serving hatch, or perhaps you want one that's able to add a little tonal flavour. Either way, the IK Multimedia Z-TONE DI can do it all.
The Lehle Sunday Driver XLR is a DI box for stage or studio that, like the other Sunday Drivers, gives attenuated signals back their original sound, among other things, but also adds a lot of warmth and detail if desired.
Compact, passive stereo DI box with CineMag transformers for high-quality signal transmission from keyboards, synths and other stereo instruments.
The Warm Audio Direct Box Passive transforms any unbalanced instrument signal into a stable balanced signal so it can travel the long distance to the mixer. On top of that, this little box adds the rich warmth and generous headroom of a CineMag transformer.
Active stereo DI box for professional signal conversion of keys, synths and stereo rigs.
The SE Electronics DM3 is an ultra-compact active DI box that boasts the headroom needed to retain every last detail in the sound of high-output instruments like active guitars and basses.
The Rupert Neve RNDI-M is an active DI box with a secret weapon: an output transformer from Rupert Neve's stable. Together with the class-A FET amp, it provides massive headroom and a huge frequency range.
This passive two-channel DI box converts the unbalanced signal from two instruments or other input sources, via an isolation transformer, to two balanced channels for use with stage or studio equipment.
The Klotz DX10 is a passive DI Box that has a hand-wired transformer with a metal shield that gives it optimal protection against interference. It also has a ground lift switch and a 20 dB attenuation switch.
The Radial PZ-DI is a welcome, expansive DI that is excellent for amplifying acoustic and/or orchestra instruments on stage. Thanks to the impedance switch, it can adapt to standard, piezo and magnetic inputs.
Designed to handle up to 9 Volts for enhanced signal quality, the Radial J48 MK2 active DI box produces maximum headroom while running on 48V phantom power.
The Strymon PCH-1 is a rock-solid active DI box, for guitarists who want to send their electric guitar and effect-chain (hi-Z) as a line signal to a mixer.
DBX's robust and shockproof DI1 DI Box is built for the stage as well as the studio. It converts an unbalanced signal into a balanced one.
The DUALXDirect is a double active interface that sends an instrument, line or amplified signal to a mixer via an isolation transformer. It is equipped with jack and XLR input connectors.
