RØDE NT2 A with reflection filter, cable and stand

RØDE NT2 A with reflection filter, cable and stand
Product no: 9000-0057-2840 Bax Music Warranty: RØDE NT2 A Studio Condenser Microphone This product comes with a 10-year warranty after registration at warranty.rode.com/register Devine MIC100/10 XLR Microphone/Signal Cable, 10m This product comes with a manufacturing defects warranty. Gravity MS 43 Microphone Stand (Black) This product comes with a 5-year warranty. Devine RF 20 Reflection Filter This product comes with a 3-year warranty.

General

A Rode NT2A large-diaphragm condenser microphone alone is not enough. That is why we have selected the necessary accessories for you. Including stand, cable and reflection filter.

Specifications

1x RØDE NT2 A Studio Condenser Microphone
The Rode NT2 A is a professional large-diaphragm capsule studio microphone with a switchable pickup pattern that can be used for all manner of studio recordings. It has three different settings: omni, cardioid and figure of 8.

Product features

Sustainable product	not specified
Microphone sensitivity (dBV/PA)	-36
Microphone impedance	200-249 ohms
Low-cut filter	yes
Maximum SPL	140 dB - 149 dB
Maximum frequency	20 - 20.9 kHz
Minimum frequency	20 - 21 Hz
Pad switch	yes
Polar pattern	cardioid, figure-8 / bi-directional, omni-directional, multi pattern
Multi-pattern	yes
Tube microphone	no
Stereo	no
Microphone accessories	shock mount, pop filter, cable, bag / box
Vintage microphone family	not applicable
Microphone sound	clean/neutral

Weight and dimensions including packaging

Weight (incl. packaging)	800 gr
Dimensions (incl. packaging)	27,0 x 21,0 x 18,0 cm

Product specifications

acoustic principle: pressure, pressure gradient
pickup pattern: three positions - omni, cardioid or figure 8
frequency range: 20 Hz to 20 kHz
output impedance 200 ohms
signal/noise ratio: 87 dB SPL
maximum SPL: 147 dB (at 1 kHz, 1% THD in 1 kOhm load)
sensitivity: -36 dB re 1 volt/pascal (6.3 mV at 94 dB SPL) +/- 2 dB at 1 kHz
delivered with storage sleeve, screw thread adapter, microphone clip, construction ring
weight: 860 grams
dimensions: 209 x 55 x 55 mm

1x Devine MIC100/10 XLR Microphone/Signal Cable, 10m
Close any huge XLR signal-based gap with this 10-metre microphone/signal cable from Devine! Equipped with durable plugs and wrapped up inside fully flexible and protective sheathing, the MIC100/10 ensures solid, reliable signal transfer.

Product features

(partially) coiled	no
Sustainable product	not specified
Right angled or straight	straight - straight
Colour	black
Length	10.00 m
Set	no
Audio connector	3-pin XLR
Type of vlogging accessory	cable

Weight and dimensions including packaging

Weight (incl. packaging)	498 gr
Dimensions (incl. packaging)	24,0 x 24,0 x 4,0 cm

Product specifications

XLR male - XLR female
can be used as a microphone cable or as an all-round signal cable
supple, rugged cable
high-grade connectors with locking option
connectors with pull relief to retain contact integrity
length: 10m
filling: cotton
oxygen-free copper
isolation diameter: 1.4mm
isolation colours: red and white
number of conductors: 2
inner conductor diameter: 0.226mm²
conductor dimensions: 20 x 0.12mm
helical sheathing: 0.12 x 64
cable diameter: 6mm
sheathing material: flexible PVC
operating temperature: -20 - +70°C
capacity @ 1 kHz:
- cond.-cond.: 131pF/m
- cond.-shield.: 178pF/m

1x Gravity MS 43 Microphone Stand (Black)
Gravity's MS 43 is a straight microphone stand with a clutch and a black finish. This sturdy model is height adjustable up to 169 cm and features a die-cast zinc base and three legs for secure stability.

Product features

Number of stands	1
Sustainable product	not specified
Microphone stand weight	2 - 3 kg
Boom arm	no
Height adjustable	yes
Colour	black
Stand material	steel
Maximum height of stand	160 to 170 cm
Included stand accessories	none
Mininum stand height	100 to 110 cm
Screw thread size	3/8 inch, 5/8 inch
Set	no
Construction	2-part telescopic
Type of stand	straight stand
Type of stand base	flat base feet

Weight and dimensions including packaging

Weight (incl. packaging)	2,5 kg
Dimensions (incl. packaging)	89,0 x 11,0 x 10,0 cm

Product specifications

Gravity MS 43
microphone with clutch
material: steel
colour: black
finish: powder-coating
min. height: 1030 mm
max. height: 1690 mm
transport length: 900 mm
height adjustment: yes
base: tri-pod
material: die-cast zinc
included colour-coding rings: 1x 15mm, 4x 20 mm (black)
weight: 2.3 kg

1x Devine RF 20 Reflection Filter
The Devine RF 20 is a great way to counter less-than optimum acoustics. This reflection filter has a durable construction with a collapsible panel and enables you to get the out of any vocal performance.

Product features

Reflection filter mount	microphone stand mount
Sustainable product	not specified
Includes pop filter / cap	no
Reflection filter for	vocal microphones, guitar microphones
Type of vlogging accessory	reflection filter

Weight and dimensions including packaging

Weight (incl. packaging)	3,0 kg
Dimensions (incl. packaging)	35,5 x 28,0 x 14,5 cm

Product specifications

reflection filter
for optimisation of your vocal recordings
absorbs reflections, caused by the acoustics of your recording space
adjustable angle, collapsible panel
material: rigid foam
perforated aluminium front panel
microphone holder equipped with a screw thread adapter
suited for nearly any microphone clip and shockmount
can be mounted on nearly any vertical microphone stand
3/8" and 5/8" screw thread

Write a review

Stix January 15, 2025

Wrote the following about Gravity MS 43 Microphone Stand (Black)

Since discovering Gravity stands I have used for live (drummer vocals) and general studio work. After 5 years all I broke was a clutch. I ordered a replacement directly from Bax which was delivered from their spare parts stock very quickly.
It’s everything you look for in a supplier - price, service, quality.

Gad July 17, 2024

Wrote the following about Devine MIC100/10 XLR Microphone/Signal Cable, 10m

Good quality, Customer service was very good and delivered within 3 days.
Thanks to bax music

Adina N. April 15, 2021

Wrote the following about RØDE NT2 A Studio Condenser Microphone

Excellent microphone for its price, love it. For some reason, it works amazing with my vocals!

Louise October 7, 2020

Wrote the following about Devine RF 20 Reflection Filter

Awesome product!

David Wellings June 8, 2020

Wrote the following about RØDE NT2 A Studio Condenser Microphone

Beautifully made, solid piece of kit easy to set up and, though pretty heavy, works nicely with my boom microphone stand!

Made my first recording with it this afternoon - sounds great (even with my voice....!)

Only problem I have had, is trying to register for the 10 year guarantee with Røde themselves....

Ash April 23, 2020

Wrote the following about Devine MIC100/10 XLR Microphone/Signal Cable, 10m

The package was sent promptly, arrived on time. I've been using this mic with the Beringer deq2496 also purchased from Bax music and it's working very well. Customer service was very good when I called to modify my order.

Anna S. March 2, 2020

Wrote the following about RØDE NT2 A Studio Condenser Microphone

good quality sound of Rode NT2 A condenser studio microphone

arbaaz s. September 13, 2016

Wrote the following about Devine RF 20 Reflection Filter

Fantastic reflection filter builds a soundproof environment around my microphone and I can tell the difference in the recordingsame.

Reviews from other countries

Translate all reviews into English View original reviews

Alexandre V. March 23, 2026

Wrote the following about RØDE NT2 A Studio Condenser Microphone

Great for beginners and bedroom producers!

Rob van Schaik September 18, 2025

Wrote the following about Devine MIC100/10 XLR Microphone/Signal Cable, 10m

Goede microfoon kabels!!!

Show all 355 reviews

Description	Type	Language
Røde NT2-A handleiding (Engels)	Manual	Dutch, English
Røde NT2-A datasheet (Engels)	Manual	English
Devine MIC100/10 Declaration of Conformity	Manual	Unknown
Handleiding	Manual	Dutch