RØDE NT2 A large-diaphragm condenser microphone with reflec

RØDE NT2 A large-diaphragm condenser microphone with reflection filter

4.6 / 5

Specifications

1x RØDE NT2 A Studio Condenser Microphone

The Rode NT2 A is a professional large-diaphragm capsule studio microphone with a switchable pickup pattern that can be used for all manner of studio recordings. It has three different settings: omni, cardioid and figure of 8.

Product features

Sustainable product: Not specified
Microphone sensitivity (dBV/PA): -36
Microphone impedance: 200-249 ohms
Low-cut filter: Yes
Maximum SPL: 140 dB - 149 dB
Maximum frequency: 20 - 20.9 kHz
Minimum frequency: 20 - 21 Hz
Pad switch: Yes
Polar pattern: Cardioid, figure-8 / bi-directional, omni-directional, multi pattern
Multi-pattern: Yes
Tube microphone: No
Stereo: No
Microphone accessories: Shock mount, pop filter, cable, bag / box
Vintage microphone family: Not applicable
Microphone sound: Clean/neutral

Weight and dimensions including packaging

Weight: 800 gr
Dimensions: 27,0 x 21,0 x 18,0 cm

Product specifications

acoustic principle: pressure, pressure gradient
pickup pattern: three positions - omni, cardioid or figure 8
frequency range: 20 Hz to 20 kHz
output impedance 200 ohms
signal/noise ratio: 87 dB SPL
maximum SPL: 147 dB (at 1 kHz, 1% THD in 1 kOhm load)
sensitivity: -36 dB re 1 volt/pascal (6.3 mV at 94 dB SPL) +/- 2 dB at 1 kHz
delivered with storage sleeve, screw thread adapter, microphone clip, construction ring
weight: 860 grams
dimensions: 209 x 55 x 55 mm

1x Devine RF 30 Reflection Filter

The solid Devine RF 30 reflection filter serves as an effective and fully mobile vocal booth fitted with adjustable, half-open side-panels and finished with absorbent foam isolation.

Product features

Reflection filter mount: Microphone stand mount
Sustainable product: Not specified
Includes pop filter / cap: No
Reflection filter for: Vocal microphones, guitar microphones
Type of vlogging accessory: Reflection filter

Weight and dimensions including packaging

Weight: 4,0 kg
Dimensions: 42,0 x 38,0 x 20,5 cm

Product specifications

reflection filter/vocal booth
for optimisation of vocal recordings
absorbs reflections, counters acoustics
three-part panel
material: rigid foam, mounted on a perforated metal frame
semi-open metal front
acoustic pyramid foam counters reflections
adjustable microphone mount
fitted with two clamps for securely mounting onto a straight microphone stand
with practical tightening knobs for ideal positioning
3/8" and 5/8" screw thread

Specifications

1x RØDE NT2 A Studio Condenser Microphone

Product features

Sustainable product: Not specified
Microphone sensitivity (dBV/PA): -36
Microphone impedance: 200-249 ohms
Low-cut filter: Yes
Maximum SPL: 140 dB - 149 dB
Maximum frequency: 20 - 20.9 kHz
Minimum frequency: 20 - 21 Hz
Pad switch: Yes
Polar pattern: Cardioid, figure-8 / bi-directional, omni-directional, multi pattern
Multi-pattern: Yes
Tube microphone: No
Stereo: No
Microphone accessories: Shock mount, pop filter, cable, bag / box
Vintage microphone family: Not applicable
Microphone sound: Clean/neutral

Weight and dimensions including packaging

Weight: 800 gr
Dimensions: 27,0 x 21,0 x 18,0 cm

Product specifications

acoustic principle: pressure, pressure gradient
pickup pattern: three positions - omni, cardioid or figure 8
frequency range: 20 Hz to 20 kHz
output impedance 200 ohms
signal/noise ratio: 87 dB SPL
maximum SPL: 147 dB (at 1 kHz, 1% THD in 1 kOhm load)
sensitivity: -36 dB re 1 volt/pascal (6.3 mV at 94 dB SPL) +/- 2 dB at 1 kHz
delivered with storage sleeve, screw thread adapter, microphone clip, construction ring
weight: 860 grams
dimensions: 209 x 55 x 55 mm

1x Devine RF 30 Reflection Filter

The solid Devine RF 30 reflection filter serves as an effective and fully mobile vocal booth fitted with adjustable, half-open side-panels and finished with absorbent foam isolation.

Product features

Reflection filter mount: Microphone stand mount
Sustainable product: Not specified
Includes pop filter / cap: No
Reflection filter for: Vocal microphones, guitar microphones
Type of vlogging accessory: Reflection filter

Weight and dimensions including packaging

Weight: 4,0 kg
Dimensions: 42,0 x 38,0 x 20,5 cm

Product specifications

reflection filter/vocal booth
for optimisation of vocal recordings
absorbs reflections, counters acoustics
three-part panel
material: rigid foam, mounted on a perforated metal frame
semi-open metal front
acoustic pyramid foam counters reflections
adjustable microphone mount
fitted with two clamps for securely mounting onto a straight microphone stand
with practical tightening knobs for ideal positioning
3/8" and 5/8" screw thread

Service promise

RØDE NT2 A Studio Condenser Microphone This product comes with a 10-year warranty after registration at warranty.rode.com/register

This product comes with a 10-year warranty after registration at warranty.rode.com/register

Devine RF 30 Reflection Filter This product comes with a 3-year warranty.

This product comes with a 3-year warranty.

Reviews (40)

4.6

40 reviews

Rating

5 stars 30 4 stars 8 3 stars 0 2 stars 0 1 star 2

Write a review

5 / 5

RØDE NT2 A Studio Condenser Microphone

Excellent microphone for its price, love it. For some reason, it works amazing with my vocals!

April 15, 2021 | Adina N.

5 / 5

RØDE NT2 A Studio Condenser Microphone

Beautifully made, solid piece of kit easy to set up and, though pretty heavy, works nicely with my boom microphone stand!

Made my first recording with it this afternoon - sounds great (even with my voice....!)

Only problem I have had, is trying to register for the 10 year guarantee with Røde themselves....

June 8, 2020 | David Wellings

5 / 5

RØDE NT2 A Studio Condenser Microphone

good quality sound of Rode NT2 A condenser studio microphone

March 2, 2020 | Anna S.

Reviews from other countries

4 / 5