RØDE NT2a + Innox IVA 12 stand

4.6 / 5

Specifications

1x RØDE NT2 A Studio Condenser Microphone

The Rode NT2 A is a professional large-diaphragm capsule studio microphone with a switchable pickup pattern that can be used for all manner of studio recordings. It has three different settings: omni, cardioid and figure of 8.

Product features

Sustainable product: Not specified
Microphone sensitivity (dBV/PA): -36
Microphone impedance: 200-249 ohms
Low-cut filter: Yes
Maximum SPL: 140 dB - 149 dB
Maximum frequency: 20 - 20.9 kHz
Minimum frequency: 20 - 21 Hz
Pad switch: Yes
Polar pattern: Cardioid, figure-8 / bi-directional, omni-directional, multi pattern
Multi-pattern: Yes
Tube microphone: No
Stereo: No
Microphone accessories: Shock mount, pop filter, cable, bag / box
Vintage microphone family: Not applicable
Microphone sound: Clean/neutral

Weight and dimensions including packaging

Weight: 800 gr
Dimensions: 27,0 x 21,0 x 18,0 cm

Product specifications

acoustic principle: pressure, pressure gradient
pickup pattern: three positions - omni, cardioid or figure 8
frequency range: 20 Hz to 20 kHz
output impedance 200 ohms
signal/noise ratio: 87 dB SPL
maximum SPL: 147 dB (at 1 kHz, 1% THD in 1 kOhm load)
sensitivity: -36 dB re 1 volt/pascal (6.3 mV at 94 dB SPL) +/- 2 dB at 1 kHz
delivered with storage sleeve, screw thread adapter, microphone clip, construction ring
weight: 860 grams
dimensions: 209 x 55 x 55 mm

1x Innox IVA 12 Microphone Stand (Black)

The Innox IVA 12 is a solid, pro-grade microphone stand equipped with a large, ergonomic tightening knob that allows you to adjust the height of the stand while the three legs have been finished with rubber feet, keeping the whole thing nice and stable.

Product features

Number of stands: 1
Sustainable product: Not specified
Microphone stand weight: 2 - 3 kg
Boom arm: Yes
Height adjustable: Yes
Colour: Black
Stand material: Steel
Maximum height of stand: 200 to 210 cm
Included stand accessories: None
Mininum stand height: Not specified
Screw thread size: 5/8 inch
Set: No
Construction: 2-part telescopic
Type of stand: Boom stand
Type of stand base: Flat base feet
Type of vlogging accessory: Microphone stand / clip

Weight and dimensions including packaging

Weight: 2,4 kg
Dimensions: 86,5 x 11,0 x 8,0 cm

Product specifications

professional microphone stand
equipped with three stand legs with rubber feet
freely adjustable height
screw thread: 5/8-inch
freely adjustable boom arm length
vertical telescopic tube, ideal for overhead microphone setups
large, ergonomic tightening knobs
practical, collapsible construction
equipped with a practical cable management system
length when folded: 860mm
required floor surface when unfolded: 600mm
maximum height in overhead position: 2m

Specifications

1x RØDE NT2 A Studio Condenser Microphone

Product features

Sustainable product: Not specified
Microphone sensitivity (dBV/PA): -36
Microphone impedance: 200-249 ohms
Low-cut filter: Yes
Maximum SPL: 140 dB - 149 dB
Maximum frequency: 20 - 20.9 kHz
Minimum frequency: 20 - 21 Hz
Pad switch: Yes
Polar pattern: Cardioid, figure-8 / bi-directional, omni-directional, multi pattern
Multi-pattern: Yes
Tube microphone: No
Stereo: No
Microphone accessories: Shock mount, pop filter, cable, bag / box
Vintage microphone family: Not applicable
Microphone sound: Clean/neutral

Weight and dimensions including packaging

Weight: 800 gr
Dimensions: 27,0 x 21,0 x 18,0 cm

Product specifications

acoustic principle: pressure, pressure gradient
pickup pattern: three positions - omni, cardioid or figure 8
frequency range: 20 Hz to 20 kHz
output impedance 200 ohms
signal/noise ratio: 87 dB SPL
maximum SPL: 147 dB (at 1 kHz, 1% THD in 1 kOhm load)
sensitivity: -36 dB re 1 volt/pascal (6.3 mV at 94 dB SPL) +/- 2 dB at 1 kHz
delivered with storage sleeve, screw thread adapter, microphone clip, construction ring
weight: 860 grams
dimensions: 209 x 55 x 55 mm

1x Innox IVA 12 Microphone Stand (Black)

Product features

Number of stands: 1
Sustainable product: Not specified
Microphone stand weight: 2 - 3 kg
Boom arm: Yes
Height adjustable: Yes
Colour: Black
Stand material: Steel
Maximum height of stand: 200 to 210 cm
Included stand accessories: None
Mininum stand height: Not specified
Screw thread size: 5/8 inch
Set: No
Construction: 2-part telescopic
Type of stand: Boom stand
Type of stand base: Flat base feet
Type of vlogging accessory: Microphone stand / clip

Weight and dimensions including packaging

Weight: 2,4 kg
Dimensions: 86,5 x 11,0 x 8,0 cm

Product specifications

professional microphone stand
equipped with three stand legs with rubber feet
freely adjustable height
screw thread: 5/8-inch
freely adjustable boom arm length
vertical telescopic tube, ideal for overhead microphone setups
large, ergonomic tightening knobs
practical, collapsible construction
equipped with a practical cable management system
length when folded: 860mm
required floor surface when unfolded: 600mm
maximum height in overhead position: 2m

Service promise

RØDE NT2 A Studio Condenser Microphone This product comes with a 10-year warranty after registration at warranty.rode.com/register

This product comes with a 10-year warranty after registration at warranty.rode.com/register

Innox IVA 12 Microphone Stand (Black) This product comes with a manufacturing defects warranty.

This product comes with a manufacturing defects warranty.

Reviews (344)

4.6

344 reviews

Rating

5 stars 254 4 stars 67 3 stars 15 2 stars 4 1 star 4

Write a review

5 / 5

RØDE NT2 A Studio Condenser Microphone

Excellent microphone for its price, love it. For some reason, it works amazing with my vocals!

April 15, 2021 | Adina N.

5 / 5

Innox IVA 12 Microphone Stand (Black)

Surprisingly good build quality for this price point, so I am impressed however do be aware, it is not that tall. This means that you can't sit on chairs with a particularly high seat, particular if you are tall. It should be find for most use cases, but just make sure you know what is going to be used for.

February 14, 2021 | Matthew W.

5 / 5

Innox IVA 12 Microphone Stand (Black)

February 14, 2021 | Matthew W.

5 / 5

Innox IVA 12 Microphone Stand (Black)

Very happy with my purchase of this mic stand. Was pleasantly surprised of the build quality at this price range and would highly recommend.

October 27, 2020 | Neil G

5 / 5

Innox IVA 12 Microphone Stand (Black)

strong and solid. awesome

August 25, 2020 | Abigail A.

5 / 5

Innox IVA 12 Microphone Stand (Black)

Wow !!!! Last week I got it and I have to say that quality is amazing for its price.

£15 is a steal

June 18, 2020 | HoganMW

5 / 5

RØDE NT2 A Studio Condenser Microphone

Beautifully made, solid piece of kit easy to set up and, though pretty heavy, works nicely with my boom microphone stand!

Made my first recording with it this afternoon - sounds great (even with my voice....!)

Only problem I have had, is trying to register for the 10 year guarantee with Røde themselves....

June 8, 2020 | David Wellings

5 / 5

Innox IVA 12 Microphone Stand (Black)

Very pleased, sturdy and solid stand for a great price.

May 13, 2020 | Greg S-R

5 / 5

Innox IVA 12 Microphone Stand (Black)

Really impressed. Heavy, solid base, all the tightening screws feel good quality and I'm digging the giant knob - came with cable clips. Couldn't ask for more at this price.

March 4, 2020 | PestilenceKills