☀️🌴SUMMER SALE! Up to 70% off selected products⏩Shop now!
Use the Rode Interview GO hand grip to turn your Wireless Go lavalier into a handheld microphone and get it ready for interviews! Foam-rubber wind shield included.
The Rode PodMic is a dynamic microphone designed for broadcasting. It's optimised for use with the RodeCaster mixer (available separately) but works with other mixers as well.
The Rode replacement mounting ring is compatible with the NT-USB microphone.
<p>The Rode SmartLAV+ is a practical lavalier microphone that you can connect directly to your iPod, iPad or iPhone. It is also compatible with a whole range of Android devices.</p>
Professional and complete, the Rode Lavalier II clip-on microphone features an omnidirectional polar pattern and a uniquely flat, low-profile design to ensure maximum discretion. Windshield, pop filter, and case included.
The Rode Wireless Go Gen 3 is a fool-proof wireless microphone system for content creators. Pair the receiver with your phone, camera or recorder and you're automatically connected to the two included transmitters.
The Rode Lavalier GO is an omni-directional lavalier microphone that works together perfectly with the Rode Wireless GO system. It also works with other devices that have a mini-jack connector.
<p>The RM5 can be used as a microphone holder for the NT5, NT55, NT6, NTG1, NTG2 and NTG3 by Rode.</p>
<p>Rode's SM6 is a shockmount and pop shield in one. It is not only suited for Rode microphones, it also fits other brands.</p>
Twenty years after the first-gen Rode NT1 dropped and flipped the proverbial table of the studio world, we get the NT1 5th Gen: a large-diaphragm condenser microphone boasting an extreme dynamic range and USB as well as XLR connectivity.
The Rode NT2 A is a professional large-diaphragm capsule studio microphone with a switchable pickup pattern that can be used for all manner of studio recordings. It has three different settings: omni, cardioid and figure of 8.
<p>The Rode M5 set consists of a matched pair of pencil microphones, which stand out thanks to their amazing price/quality ratio. Create fresh stereo recordings or use them separately for mono sources. Rode pair in the spirit of the NT5.</p>
The Rode RODELINK Lavalier works perfectly with the RODELINK wireless microphone set. This high-quality lavalier has an omnidirectional pickup pattern so you can make crystal-clear, multi-directional recordings.
Looking for a potent yet fuss-free wireless microphone system for vlogs, interviews and other content? Check out the Rode Wireless ME.
<p>The Rode Procaster is a professional dynamic microphone, which is perfect for broadcasting thanks to its closed pickup pattern an specific frequency response.</p>
The Rode NT-USB MINI microphone has everything needed to produce professional-grade audio. Whether it's for content creation, gaming, or meetings, this compact Rode mike is the perfect addition to any desktop or home studio set-up.
<p>Rode WS2 windscreen for the Rode K2, NTK, NT1-A, NT2-A, NT1000, NT2000, Procaster and Broadcaster.</p>
<p>In the past, Rode have described the M1 as canned Rock & Roll and not without reason! The M1 dynamic microphone is a true on-stage beast that can take a bit of musician/roadie handling.</p>
Equipped with both a USB-C and an XLR port, the Rode Podmic USB supports a fuss-free, direct link-up with a computer as well as more extensive set-ups that include a mixer or audio interface.
The Rode VideoMic Me-L is a low-latency condenser microphone complete with Lightning cable so that it can be directly plugged into an iPhone or iPad.
The Rode PodMic is a dynamic microphone designed for broadcasting. It's optimised for use with the RodeCaster mixer but works with other mixers as well.
<p>With this lavalier clip, your lavalier microphone can be discreetly fastened to your clothing - a highly practical accessory for any Rode Lavalier tie-clip microphone user!</p>
<p>The name speaks for itself: the Rode Broadcaster is designed for radio applications that require a large frequency range and as little distortion as possible. This has made the Broadcaster the standard condenser microphone in the world of radio.</p>
Designed exclusively for smartphones, the Rode Wireless Micro system includes a single receiver that's simply plugged into the USB-C port port of your phone and paired with the two included clip-on microphones.
<p>The PSM1 is a shockmount for the Rode Procaster and the Podcaster.</p>
<p>The Pivot Adaptor by Rode is a practical adapter that allows you to attune the angle of your microphone clip re the stand. Thanks to the accessory screw thread adapter, the Rode Adaptor fits on nearly any stand.</p>
Now that the NT-USB microphone has reached a legendary status, RØDE launch the NT-USB+, seeking to go one step further with the addition of a built-in DSP and various other new functions.
<p>The WS lavalier is a black windscreen that reduces wind and breathing noise. This windscreen is designed for use with Rode's lavalier mic. The set consists of three black WS lavalier windscreens.</p>
This matched pair of Rode NT5 small-diaphragm condenser microphones can be set up to capture stunning stereo recordings in an X-Y, A-B, or ORTF configuration, or can be used for mono close-miking.
The Rode Interview PRO is compatible with all Rode Series IV receivers. This wireless handheld condenser microphone features a built-in 32-bit recorder, GainAssist technology and an omnidirectional pickup pattern. Clip and pouch included.
The old, renowned Blimp is back and better than ever! Ideal for Rode’s NTG1, NTG2 and NTG3 directional mics – counters wind and storm noises. Incl. improved shockmount (with Rycote Lure) and Dead Wombat.
Just like the NT1-A, the Rode NT1 Signature Series large-diaphragm condenser microphone simply offers excellent sound without any fussy settings or overcomplex functions. With shock mount, pop filter and cover.
Everyone knows you can't just plug a lavalier or headset microphone into the XLR mic input of a mixer or audio interface and expect it to work. First, you need the Rode VXLR Pro: a stereo mini-jack to XLR adapter with built-in phantom power conversion.
Rode's VideoMic Pro Rycote is the improved version of the VideoMic Pro. With its new, high-quality Rycote Lyre shock mount and more sensitive capsule.
The Rode NTG2 is a directional microphone that is specifically designed for film, video, TV, voice over and ENG applications. The main difference between the NTG2 and NTG1 is an internal battery.
<p>The Rode M2 is a cardioid condenser microphone suited for both the studio and the stage. The M3 has a wide range and a low signal noise ratio.</p>
The Rode Reporter microphone is suitable for indoor and outdoor use and is ideal for interviews. Its multi-layer grille acts as a filter and windshield and it features an omnidirectional capsule.
Filters