Professional and complete, the Rode Lavalier II clip-on microphone features an omnidirectional polar pattern and a uniquely flat, low-profile design to ensure maximum discretion. Windshield, pop filter, and case included.
The Rode Thread Adapter actually combines three screw thread adapters into one. Fit it to your camera bag or key ring via the carabiner clip and you'll never have to deal with thread-incompatibility issues again.
Transform your Android phone into a fully-fledged, pocket-sized TV studio with the Rode Universal Vlogger Kit. This accessory pack raises the performance of the built-in mic and camera of your phone to a more professional level.
Transform your phone into a fully-fledged, pocket-sized TV studio with the Rode USB-C Vlogger Kit. This accessory pack raises the performance of the built-in mic of your phone, and your general setup, to a more professional level.
The Rode VideoMic MKII has enjoyed a little update to yield a big increase in the quality of your sound. The MKII version features a Rycote suspension, so there will be no more messing about with elastic bands!
Rode's VideoMic Pro Rycote is the improved version of the VideoMic Pro. With its new, high-quality Rycote Lyre shock mount and more sensitive capsule.
The Rode Lavalier GO is an omni-directional lavalier microphone that works together perfectly with the Rode Wireless GO system. It also works with other devices that have a mini-jack connector.
The Rode Interview GO handle turns the separately available Wireless Go tie-pin microphone into a handheld microphone. Ideal for interviews. Includes foam windshield.
The Rode Wireless Micro is a wireless microphone system specifically for smartphones. Connect the USB‑C receiver to your phone and you can immediately use the two transmitters with built-in microphone for all your content!
This set of 2 elastic bands can be used as a replacement part for the SM6 shockmount by Rode.
In the past, Rode have described the M1 as canned Rock & Roll and not without reason! The M1 dynamic microphone is a true on-stage beast that can take a bit of musician/roadie handling.
The Rode M2 is a condenser microphone for live use. Its rugged housing protects it from falls and bumps. Thanks to a super-cardioid pickup pattern, it can be used in the studio for vocal and instrumental recordings.
The Rode M2 is a cardioid condenser microphone suited for both the studio and the stage. The M3 has a wide range and a low signal noise ratio.
The Rode NT5 condenser studio microphone has a highly focussed cardioid pickup pattern, making it cut out for capturing acoustic instruments, drums, wind instruments and percussion with maximum detail.
The NT55 set contains a matched pair of compact, balanced condenser microphones, fit for a variety of applications. It excels because of its wide dynamic range and complete frequency response.
The Rode K2 is a large-diaphragm tube microphone and has a number of unique properties, one of which is the unique, fully adjustable pickup pattern.
The name speaks for itself: the Rode Broadcaster is designed for radio applications that require a large frequency range and as little distortion as possible. This has made the Broadcaster the standard condenser microphone in the world of radio.
The Rode NTG2 is a directional microphone that is specifically designed for film, video, TV, voice over and ENG applications. The main difference between the NTG2 and NTG1 is an internal battery.
Rode SM2 shock Mount for the Rode NT2A, NTK, K2, NT1000, NT2000 and the Classic 2.
The Rode WSVM is used when your recording environment only suffers from a little bit of wind. It is also used to suppress loud sounds in speech.
Rode's SM6 is a shockmount and pop shield in one. It is not only suited for Rode microphones, it also fits other brands.
The RM2 is a low-profile professional stand mount for the models including the Rode NT2-A, NT1000, NT2000, NTK, K2, Classic II & Broadcaster microphones.
With the Rode NTG-2 directional condenser microphone and a boom pole, you are provided with a perfect set for on-location recordings.
The Pivot Adaptor by Rode is a practical adapter that allows you to attune the angle of your microphone clip re the stand. Thanks to the accessory screw thread adapter, the Rode Adaptor fits on nearly any stand.
Just like the NT1-A, the Rode NT1 Signature Series large-diaphragm condenser microphone simply offers excellent sound without any fussy settings or overcomplex functions. With shock mount, pop filter and cover.
Do you already own a Wireless Micro transmitter, and are actually looking for a nice reporter microphone? With this RØDE Interview Micro adapter, you can put that transmitter in the holder, put the plop cap on it, and you're done!
The Rode NT2 A is a professional large-diaphragm capsule studio microphone with a switchable pickup pattern that can be used for all manner of studio recordings. It has three different settings: omni, cardioid and figure of 8.
Rode's PG2-R is a pistol grip shock mount designed to keep contact sound and unwanted vibrations to a minimum. It's fitted with the Rycote Lyre shock mount system.
The Rode WS14 pop filter has been exclusively designed to fit both the Rode PodMic and PodMic USB. Slot it over the grille, counter vocal plosives like 'P' and 'F' and gain clean sound.
If you do want to invest in the Wireless Go Gen 3 wireless tie-pick microphone, do yourself a favour, and pick up this Charging Case+ as well. A handy case for charging your Wireless Go III system.
Twenty years after the first-gen Rode NT1 dropped and flipped the proverbial table of the studio world, we get the NT1 5th Gen: a large-diaphragm condenser microphone boasting an extreme dynamic range and USB as well as XLR connectivity.
The Rode Wireless Go Gen 3 is a fool-proof wireless microphone system for content creators. Pair the receiver with your phone, camera or recorder and you're automatically connected to the two included transmitters.
Transform your iPhone into a fully-fledged, pocket-sized TV studio with the Rode Vlogger Kit for iOS. This accessory pack raises the performance of the built-in mic and camera of your phone to a more professional level. Lighting and stand included.
The Rode Magclip GO offers you an ingenuous way to attach and hide your Wireless GO lavalier microphone behind your lapels. All that remains visible is a sleek, clean-looking magnet.
Use the Rode Interview GO hand grip to turn your Wireless Go lavalier into a handheld microphone and get it ready for interviews! Foam-rubber wind shield included.
Upgrade your field kit with the Røde LB-1 rechargeable battery and set yourself up with up to 10 hours of additional battery life for your Performer TX-M2 and up to 100 hours of continuous power supply for VideoMic Pro+.
The Rode NT-SF1 is a unique microphone fitted with 4 small-diaphragm capsules for 3-dimensional ambisonic recording.
The Rode VideoMic Me-L is a low-latency condenser microphone complete with Lightning cable so that it can be directly plugged into an iPhone or iPad.
The Rode RODELINK Lavalier works perfectly with the RODELINK wireless microphone set. This high-quality lavalier has an omnidirectional pickup pattern so you can make crystal-clear, multi-directional recordings.
The Rode NTG5 shotgun microphone is a gift from heaven for film makers and sound technicians. This professional microphone weighs just 76 grams and can withstand any type of weather. Pistol-grip and plush windshield included!
A large-diaphragm condenser microphone like Rode's NT2 A deserves a good tripod. That's why we've done the legwork for you. This bundle comes complete with Innox IVA 12 microphone stand.
Want to use the Rode NT2 A for podcasting? Then you need a sturdy broadcast arm. That's why we have carefully put together this bundle for you. It consists of a Rode NT2A condenser microphone and the Innox IVA 08 PRO.
Filters