Transform your Android phone into a fully-fledged, pocket-sized TV studio with the Rode Universal Vlogger Kit. This accessory pack raises the performance of the built-in mic and camera of your phone to a more professional level.
Transform your phone into a fully-fledged, pocket-sized TV studio with the Rode USB-C Vlogger Kit. This accessory pack raises the performance of the built-in mic of your phone, and your general setup, to a more professional level.
The Rode Lavalier GO is an omni-directional lavalier microphone that works together perfectly with the Rode Wireless GO system. It also works with other devices that have a mini-jack connector.
The Rode VideoMic MKII has enjoyed a little update to yield a big increase in the quality of your sound. The MKII version features a Rycote suspension, so there will be no more messing about with elastic bands!
Røde has included a Rycote shock mount with the Stereo Videomic Pro and equipped it with quieter capsules to keep handling noise to a minimum. What's more, it features a preamp that adds an extra 20dB gain.
The Rode VXLR+ phantom power adapter is an ideal addition for products like the VideoMic. It converts XLR to mini jack and 12 - 48-volt phantom power to 3 - 5-volt plug-in power.
Rode's VideoMic Pro Rycote is the improved version of the VideoMic Pro. With its new, high-quality Rycote Lyre shock mount and more sensitive capsule.
The Rode Thread Adapter actually combines three screw thread adapters into one. Fit it to your camera bag or key ring via the carabiner clip and you'll never have to deal with thread-incompatibility issues again.
Professional and complete, the Rode Lavalier II clip-on microphone features an omnidirectional polar pattern and a uniquely flat, low-profile design to ensure maximum discretion. Windshield, pop filter, and case included.
The Rode NT-USB MINI microphone has everything needed to produce professional-grade audio. Whether it's for content creation, gaming, or meetings, this compact Rode mike is the perfect addition to any desktop or home studio set-up.
This set of 2 elastic bands can be used as a replacement part for the SM6 shockmount by Rode.
In the past, Rode have described the M1 as canned Rock & Roll and not without reason! The M1 dynamic microphone is a true on-stage beast that can take a bit of musician/roadie handling.
The Rode M2 is a condenser microphone for live use. Its rugged housing protects it from falls and bumps. Thanks to a super-cardioid pickup pattern, it can be used in the studio for vocal and instrumental recordings.
The Rode M2 is a cardioid condenser microphone suited for both the studio and the stage. The M3 has a wide range and a low signal noise ratio.
The Rode NT2 A is a professional large-diaphragm capsule studio microphone with a switchable pickup pattern that can be used for all manner of studio recordings. It has three different settings: omni, cardioid and figure of 8.
The Rode NT5 condenser studio microphone has a highly focussed cardioid pickup pattern, making it cut out for capturing acoustic instruments, drums, wind instruments and percussion with maximum detail.
This matched pair of Rode NT5 small-diaphragm condenser microphones can be set up to capture stunning stereo recordings in an X-Y, A-B, or ORTF configuration, or can be used for mono close-miking.
The NT55 set contains a matched pair of compact, balanced condenser microphones, fit for a variety of applications. It excels because of its wide dynamic range and complete frequency response.
The Rode K2 is a large-diaphragm tube microphone and has a number of unique properties, one of which is the unique, fully adjustable pickup pattern.
The Rode Procaster is a professional dynamic microphone, which is perfect for broadcasting thanks to its closed pickup pattern an specific frequency response.
The name speaks for itself: the Rode Broadcaster is designed for radio applications that require a large frequency range and as little distortion as possible. This has made the Broadcaster the standard condenser microphone in the world of radio.
The Rode NTG1 shotgun microphone is specifically designed for the film, video, television, voice-over and production industry.
The Rode NTG2 is a directional microphone that is specifically designed for film, video, TV, voice over and ENG applications. The main difference between the NTG2 and NTG1 is an internal battery.
Rode SM2 shock Mount for the Rode NT2A, NTK, K2, NT1000, NT2000 and the Classic 2.
The PSM1 is a shockmount for the Rode Procaster and the Podcaster.
Rode WS2 windscreen for the Rode K2, NTK, NT1-A, NT2-A, NT1000, NT2000, Procaster and Broadcaster.
The Rode WSVM is used when your recording environment only suffers from a little bit of wind. It is also used to suppress loud sounds in speech.
The Røde Dead Kitten wind shield is specifically designed for the iXY, Stereo VideoMic and NT4 microphones. It minimises ambient noise in extremely windy situations.
The NT45-O is a interchangeable omni capsule for the NT5, NT55 and NT6 microphones. Its omnidirectional pickup pattern is designed for equal sensitivity at all sides of the capsule, to allow for the recording of more 'room'.
Rode's SM6 is a shockmount and pop shield in one. It is not only suited for Rode microphones, it also fits other brands.
The RM2 is a low-profile professional stand mount for the models including the Rode NT2-A, NT1000, NT2000, NTK, K2, Classic II & Broadcaster microphones.
With the Rode NTG-2 directional condenser microphone and a boom pole, you are provided with a perfect set for on-location recordings.
If you are creating recordings with your Rode Blimp microphone, you need as transparent a sound as possible. The Rode Dead Wombat keeps wind out of your recordings.
Transform your iPhone into a fully-fledged, pocket-sized TV studio with the Rode Vlogger Kit for iOS. This accessory pack raises the performance of the built-in mic and camera of your phone to a more professional level. Lighting and stand included.
Everyone knows you can't just plug a lavalier or headset microphone into the XLR mic input of a mixer or audio interface and expect it to work. First, you need the Rode VXLR Pro: a stereo mini-jack to XLR adapter with built-in phantom power conversion.
The Rode WS11 Windshield has been exclusively designed to fit the VideoMic NTG camera microphone and has been made from faux-fur, making it far more effective than standard foam.
The Rode Magclip GO offers you an ingenuous way to attach and hide your Wireless GO lavalier microphone behind your lapels. All that remains visible is a sleek, clean-looking magnet.
Use the Rode Interview GO hand grip to turn your Wireless Go lavalier into a handheld microphone and get it ready for interviews! Foam-rubber wind shield included.
Upgrade your field kit with the Røde LB-1 rechargeable battery and set yourself up with up to 10 hours of additional battery life for your Performer TX-M2 and up to 100 hours of continuous power supply for VideoMic Pro+.
Specifically designed for Røde's popular VideoMic Pro+, the DeadCat VMP+ is a highly effective, easy-to-install windshield.
The Rode NT-SF1 is a unique microphone fitted with 4 small-diaphragm capsules for 3-dimensional ambisonic recording.
The Rode VideoMic Me-L is a low-latency condenser microphone complete with Lightning cable so that it can be directly plugged into an iPhone or iPad.
The Rode RODELINK Lavalier works perfectly with the RODELINK wireless microphone set. This high-quality lavalier has an omnidirectional pickup pattern so you can make crystal-clear, multi-directional recordings.
The Rode NTG5 shotgun microphone is a gift from heaven for film makers and sound technicians. This professional microphone weighs just 76 grams and can withstand any type of weather. Pistol-grip and plush windshield included!
Want to use the Rode NT2 A for podcasting? Then you need a sturdy broadcast arm. That's why we have carefully put together this bundle for you. It consists of a Rode NT2A condenser microphone and the Innox IVA 08 PRO.
The Rode Videomic NTG is an enormously flexible on-camera microphone that can double as a boom mic and is fully adjustable for recording voice overs, podcasts, gaming or live streaming.
The RM3 microphone holder is specifically designed for the various Rode microphones. It can be used for the M2, M3, NT3 and NT4.
Filters