You choose the Shure TwinPlex TL48 variant for when you want to accentuate dialogue for film and TV applications. This is a professional tie-pin microphone with a robust, water-repellent cable.
Replace the grille of your Shure KSM8 Dualdyne microphone with the RPM268 in silver.
As a reporter, you find yourself in a wide variety of situations. A wide range of separately available capsules is available for the Shure VPH microphone handle so you have the right microphone for every situation.
The Shure PSM300 in-ear system is an outstanding on-stage solution for custom, detailed in-ear monitoring. The PSM 300 Twin Pack Pro includes two complete wireless systems for performers who like to use every bit of the stage.
Shure introduces a dual diaphragm with this QLXD2K8B transmitter, and in doing so, they also have a world first. This wireless transmitter for the QLX-D wireless system possesses the impressive KSM8 microphone module.
Fully protect the Shure MOTIV MV88 iOS microphone from wind noise on location with the tailor-made Shure AMV88-FUR Windjammer. This efficient recording tool was developed in collaboration with Rycote.
The Shure P3TRA (H20) wireless in-ear monitor system is designed for use in Belgium (frequency range 518-542 MHz). This pack includes a transmitter and an extensive P3RA receiver.
The Shure VP89S is a professional shotgun microphone that is especially well suited for discreet on-camera mounting. It offers exceptionally clean recordings.
The Shure VP89M is a professional shotgun microphone well suited for specific directional recordings. Your recording is protected from any unwanted ambient noise lying outside of the pickup angle of this mic.
Shure's VP89L is a remarkably long professional shotgun microphone that allows for crystal-clear recordings over long distances.
The replacement Shure SE425-CL in-ear monitor offers the same excellent quality as the original. This model is black, and meant for your right ear.
When the left side of your SE425 monitor set is broken, the replacement Shure SE425 two-way in-ear monitor allows you to keep enjoying that Shure sound.
Shure's SE535-CL is an advanced in-ear monitor set with triple micro drivers. This spare in-ear monitor replaces the left monitor if it's broken or damaged.
This replacement in-ear monitor allows you to continue enjoying your Shure SE535-CL in-ear monitor set, even if one channel has given up the ghost.
This microphone windshield is made of high-quality materials and features a synthetic fur cover. It reduces wind noise by up to 25 dB!
This Lyre mount with CCA by Shure was designed especially for the VP89S and VP89M shotgun microphones, and helps keep the mic firmly in place.
The Shure A89M-SH shoe mount adapter is suited for the VP89S and VP89M shotgun microphones. It provides isolation against vibrations and handling noise.
The Shure VP82 is a discreet shotgun microphone, which can easily be fastened to a video camera or boom pole. The VP82 is perfect for recording speech or ambient sounds.
Feedback is virtually impossible with the PG58. Additionally, as it is combined with Shure's BLX-2 handheld transmitter, this rugged vocal microphone is fully wireless. Powered by two AA batteries.
The Shure BLX-4 is a compact wireless UHF receiver with built-in antennas. Thanks to its QuickScan function, available frequencies are quickly found.
The Shure PSM 900 P9RA is an individual wireless receiver-bodypack out of the professional PSM 900 in-ear monitoring system. Frequency band: L6E (656-692 MHz).
The Shure SBC800-E 8-Up charges up to eight Shure SB900 batteries simultaneously. These rechargeable batteries are used for the P10R and P9RA in-ear monitor systems.
Beautiful, stylish velveteen pouch for the Shure KSM32 condenser microphone. The A32VB is a certified Shure accessory to protect your microphones from dents and scratches.
The Shure A300M ShureLock is a rugged microphone mount with thread lock designed for the KSM313 and KSM353 ribbon microphones.
The Shure A15BT bridging transformer is used to connect balanced and unbalanced devices with different levels or different impedances.
Microphones with a sparkling sound deserve a shiny look as well. The A300PC is made for Shure's KSM microphones, but can also be used for other devices.
Shure recommend you use this warm red pouch for your KSM313 studio microphone. Keep it safe from scratching with the A313VB pouch. With Shure logo.
Have you lost your earphone case?? If it was either the EA622. EA625, PA322 or PA325, then the Shure EASCASE is the ideal replacement.
Lost? Worn? No need to worry, here's the black RPW186 replacement head for your Shure KSM9HS vocal microphone. After quick and easy mounting, you're good to go!
The grille of your KSM9 wireless microphone black may get damaged during a gig or transport. Don't worry: Shure offers an adequate replacement! Mount it to your microphone, and you will be able to sing on with a mic that’s in perfect condition.
This practical, nifty solution is perfect for performers that miss a mute button on their wireless microphone. Simply unscrew the head and place the UAMS between it and the body.
The Shure PS124 is an in-line power supply, equipped with non-lockable connectors for 4 wireless receivers (PG, PGX, PGXD, SLX) and/or PSM 200 transmitters.
End the explosive character of plosives! This Shure RK184WS windscreen for the SM1, SM2, SM10, SM12 and SM14 allows you to record a speaker or vocalist completely cleanly.
This capsule can be screwed on a Shure Beta 181/Pre to turn it into a full-fledged condenser microphone. It has a bi-directional pickup pattern.
This capsule can be screwed onto a Shure Beta 181 preamp, to create a full-fledged cardioid condenser microphone.
In combination with a Shure Beta 181 preamp you can create a full-fledged microphone with this product. It has a super-cardioid pickup pattern.
With this compact condenser microphone, you will be able to make excellent sound recordings. Its super-cardioid pickup pattern makes this model ideal for snare drums, acoustic instruments and anything loud!
With this omnidirectional condenser by Shure, you will be able to create recordings that accurately represent the ambiance of a location. Thanks to the modularity of the 181 system, you can also install other capsules.
This practical accessory for your Beta 181, can come in handy at any time! It counters loud popping noises that are caused because the wind is blowing or someone is overarticulating their P's and is suited for the Shure Beta 181 series.
This carrying case has room for all the essentials of the Shure Beta 181 series: one preamp, 4 capsules, a windscreen and an adapter. Very practical!
For the best recordings you need a good shockmount. For the Shure KSM42 this is the A42SM. This black shock-breaker has elastic suspension and is an indispensable part of the recording process.
These four elastic bands are vital to your Shure shock mount. These replacement O Rings will restore your shock mount's absorbing capabilities.
