The Shure SLXD4Q+ Receiver packs no less than four channels away in one single and sleek 19 inch unit. This hub supports an extra-wide frequency band so all four microphones are assured of clear, clean and consistent performance.
The Shure SLXD4Q+ Receiver packs no less than four channels away in one single and sleek 19 inch unit. This hub supports an extra-wide frequency band plus Dante network connection as part of larger systems.
The Shure TwinPlex TH53 headset delivers unprecedented performance across the entire frequency range. Thanks to the TwinPlex element, you will keep your audience completely captivated by your story or song!
The Shure TwinPlex TL47 is a highly versatile, professional tie-pipe microphone available in many versions for bodypack connections. This is a sensitive microphone for vocals and speech!
You choose the Shure TwinPlex TL48 variant for when you want to accentuate dialogue for film and TV applications. This is a professional tie-pin microphone with a robust, water-repellent cable.
The Shure RPM400LEMO is a wired microphone preamplifier with an adapter from TQG to XLR connector. This preamplifier is suitable for all Shure TwinPlex microphones such as the TL45, 46, 47, 48 and TH53 headsets.
Looking for the flattest possible microphone response for your Shure TwinPlex TH45, 46, 47 or TH53 tie and head microphone(s)? With the Shure RPM40FC, you have a handy set of 10 Flat Caps suitable for this purpose.
Lost the standard storage case supplied with your Shure TL40 series TwinPlex microphone? The Shure RPM40CASE is a suitable replacement for it!
The Shure MD40TA5F is a handy adapter, equipped with a Microdot to TA5F reducer for Shure bell packs and similar equipment.
When the rod arm of your Shure TwinPlex TH53 headset microphone is damaged, of course you don't buy a completely new headset! Replace this rod arm with the RPM53/O spare part.
The Shure RPM50ES will make wearing your Shure TH53 headset just that little bit more comfortable. This is a set of Sleeves that you can slide around the ear hooks of your headset.
The Shure UA825-RSMA refers to an SMA coaxial cable with reverse polarity. It is possible to use this 7.6 cm cable to mount antennas at longer distances on GLX-D wireless systems.
The Shure UA850-RSMA refers to an SMA coaxial cable with reverse polarity. It is possible to use this 15.2 m cable to mount antennas at longer distances on GLX-D wireless systems.
The Shure SBC10-MicroB is suitable for charging the lithium-ion batteries of GLX-D wireless systems, such as in the beltpacks or handheld transmitters.
The Shure UA505-RSMA mounting bracket refers to a set of spare parts for mounting the UA8-RSMA and PA805Z2-RSMA antennas.
The Shure UA8100-RSMA refers to an SMA coaxial cable with reverse polarity. It is possible to use this 30.5m cable to mount antennas at longer distances on GLX-D wireless systems.
To record in the driving rain or into the teeth of the wind, you need a microphone that can withstand the elements. The Shure DuraPlex DH5 is one such microphone, and comes with a comfortable headset frame.
Shure SBC-DC DC voltage adapter for SB900-compatible bodypack transmitters/receivers such as the Shure P10R, P9Ra, QLXD1, ULXD1 and UR5.
The Shure KSM11 is a condenser capsule for your Shure wireless system like you haven't heard before. Even under the most challenging conditions, your voice remains clear and in the foreground.
This USB-C connection cable provides the perfect solution for charging GLX-D+ Dual Band handheld and bodypack transmitters on the go. Please note that it comes with a European plug.
New dual-band omnidirectional 45º antenna for use with GLX-D+ dual-band digital wireless systems. Compatible with GLXD4R+ receiver and GLXD+ FMDB Frequency Manager.
The Shure UA221DB-RSMA passive antenna splitter splits an incoming signal into two output signals, allowing two GLXD4R+ receivers to share a single pair of antennas.
Shure MoveMic AMV-LAV-FUR Furry Windshield for MoveMic Clip-on Microphone
The Shure MoveMic MV-One is a wireless clip-on microphone with a built-in transmitter that can be effortlessly paired with your phone via Bluetooth. Ideal for content creators, this smart wireless system includes a windshield and charging case.
Do you have a Shure MoveMic set and want to be able to use these wireless tie microphones with a camera as well? You can! With the Shure MoveMic MV-R. This receiver comes with mini jack cable, usb-C cable and a shoe mount
The Shure MoveMic AMV-LAV-WS/B set includes two black windshields for Shure's MoveMic wireless clip-on microphone.
The Shure MoveMic AMV-3.5-3.5 Mini-Jack Cable is what you need to connect your MoveMic MV-R receiver to a camera or recorder equipped with a mini-jack input.
The Shure MoveMic Lav is simply connected via Bluetooth and instantly upgrades the audio in your videos. This smart clip-on microphone is easily controlled via the free ShurePlus MOTIV app.
The Shure MoveMic Magnetic Mount offers an alternative mounting method for your MoveMic microphone. Instead of a peg, the Magnetic Mount uses a metal plate and a magnet.
From two-person vlogs to sharp interviews, the Shure MoveMic MV-Two wireless microphone system supports it all and kits you out with two MoveMic LAV clip-on microphones that can be paired to your phone via Bluetooth. Charging case included.
The Shure PSM300 in-ear system is an outstanding on-stage solution for custom, detailed in-ear monitoring. The PSM 300 Twin Pack Pro includes two complete wireless systems for performers who like to use every bit of the stage.
