IK Multimedia iLoud MTM MK II Immersive Bundle (11-Piece Set)
IK Multimedia
Specifications
Product features
- Sustainable product
- Not specified
- Studio monitor set
- Dolby Atmos® (11-piece set)
- Type of studio monitor
- MTM (woofer + tweeter + woofer)
- Active or passive
- Active
- Tweeter diameter
- 1 inch
- Mid driver diameter
- Not applicable
- Woofer diameter
- 2 x 3.5 inch
- Coaxial
- No
- Bass reflex system
- Back
- Internal calibration
- Yes
- Colour
- Black
- Minimum frequency
- 40 - 49 Hz
- Maximum frequency
- 27 - 28.9 kHz
- RMS power in watts
- 100 - 199 W
- Speaker connections
- 6.3 mm jack microphone input, XLR / TRS combo input
Weight and dimensions including packaging
- Weight
- 41,0 kg
- Dimensions
- 86,0 x 68,0 x 48,0 cm
Product specifications
- type: 2-way/3-speaker bi-amplified, digitally controlled studio monitor
- LF-drivers: 2 x 3.5" composite cellulose fibre, custom designed mid-woofers
- HF-drivers: 1" low distortion, back chambered side dome tweeter
- acoustic design: DSP tuned bass reflex
- number of amplifiers per speaker: 2
- amplifier type: high efficiency Class-D
- power: 100 Watts RMS
- power: 70 Watts RMS
- power: 30 Watt RMS
- crossover type: digital, linear phase
- crossover frequency: 2.8 kHz
- frequency range: 48 Hz to 28 kHz ± 2 dB, 36 Hz to 32 kHz at -10 dB
- phase response: System coherence within +/- 15° from 200 Hz to 20 kHz
- sensitivity at +4 dBu: -6 dBu signal generated, 94 dB SPL at 1m
- sensitivity at -10 dBV: -17 dBu signal generated, 94 dB SPL at 1m
- continuous, long term SPL free field, 1m distance, one speaker, ANSI-2034
- peak SPL, half room, 1m distance, one speaker, ANSI-2034
- placement settings: manual switched for LP expansion, LF trim, HF trim, desk position
- LF expansion switches: sets -3dB frequency range point at 40, 50, 60 or 80 Hz (LFE)
- LF-switch: Low Shelf, +2 dB or -3 dB from 100 Hz down
- HF-switch: High Shelf, +2 dB or -3 dB from 8 kHz up
- desk-switch: -4 dB at 160 Hz and +1 dB at 1,8 kHz
- calibration: full automatic built-in digital calibration
- full DSP control
- total latency (TOF): 2.44 ms
- connections: 1x combo XLR/3.5mm TRS jack balanced input; 3.5mm TS jack ARC microphone input, 1x USB type-B port, AC POWER socket
- power requirements: 90 to 240V AC, automatically activated, 50 or 60 Hz, 120W max. power consumption
- included: ARC MEMS calibration microphone
Specifications
Product features
- Sustainable product
- Not specified
- Studio monitor set
- Dolby Atmos® (11-piece set)
- Type of studio monitor
- MTM (woofer + tweeter + woofer)
- Active or passive
- Active
- Tweeter diameter
- 1 inch
- Mid driver diameter
- Not applicable
- Woofer diameter
- 2 x 3.5 inch
- Coaxial
- No
- Bass reflex system
- Back
- Internal calibration
- Yes
- Colour
- Black
- Minimum frequency
- 40 - 49 Hz
- Maximum frequency
- 27 - 28.9 kHz
- RMS power in watts
- 100 - 199 W
- Speaker connections
- 6.3 mm jack microphone input, XLR / TRS combo input
Weight and dimensions including packaging
- Weight
- 41,0 kg
- Dimensions
- 86,0 x 68,0 x 48,0 cm
Product specifications
- type: 2-way/3-speaker bi-amplified, digitally controlled studio monitor
- LF-drivers: 2 x 3.5" composite cellulose fibre, custom designed mid-woofers
- HF-drivers: 1" low distortion, back chambered side dome tweeter
- acoustic design: DSP tuned bass reflex
- number of amplifiers per speaker: 2
- amplifier type: high efficiency Class-D
- power: 100 Watts RMS
- power: 70 Watts RMS
- power: 30 Watt RMS
- crossover type: digital, linear phase
- crossover frequency: 2.8 kHz
- frequency range: 48 Hz to 28 kHz ± 2 dB, 36 Hz to 32 kHz at -10 dB
- phase response: System coherence within +/- 15° from 200 Hz to 20 kHz
- sensitivity at +4 dBu: -6 dBu signal generated, 94 dB SPL at 1m
- sensitivity at -10 dBV: -17 dBu signal generated, 94 dB SPL at 1m
- continuous, long term SPL free field, 1m distance, one speaker, ANSI-2034
- peak SPL, half room, 1m distance, one speaker, ANSI-2034
- placement settings: manual switched for LP expansion, LF trim, HF trim, desk position
- LF expansion switches: sets -3dB frequency range point at 40, 50, 60 or 80 Hz (LFE)
- LF-switch: Low Shelf, +2 dB or -3 dB from 100 Hz down
- HF-switch: High Shelf, +2 dB or -3 dB from 8 kHz up
- desk-switch: -4 dB at 160 Hz and +1 dB at 1,8 kHz
- calibration: full automatic built-in digital calibration
- full DSP control
- total latency (TOF): 2.44 ms
- connections: 1x combo XLR/3.5mm TRS jack balanced input; 3.5mm TS jack ARC microphone input, 1x USB type-B port, AC POWER socket
- power requirements: 90 to 240V AC, automatically activated, 50 or 60 Hz, 120W max. power consumption
- included: ARC MEMS calibration microphone
Product information
Product no: 9000-0128-0429
General
With the fast development of immersive audio systems like Dolby Atmos®, there's more and more demand for studios to kit themselves out with multi-channel monitoring systems, including 7.1.4 setups. The IK Multimedia iLoud MTM MKII Immersive Bundle is essentially the ultimate setup when it comes to taking Dolby Atmos® mixes to the highest level. These monitors don't just deliver impressively accurate audio that puts every nuance of your mix on full show, but comes backed up by an array of functions to help perfect your production work.
Advanced Technology & Precision
Built-in ARC (Automatic Room Correction) self-calibration ensures that the advanced iLoud MTM MKII monitor automatically tunes itself to match any placement or position, including ceiling suspension. This means that you're always 100% assured of the most accurate and balanced sound possible, no matter the natural acoustics of the space you're working in. Point source performance further guarantees consistent clarity and precision - a feature that's essential when it comes to immersive audio systems, since the listening position can vary. Now supported by integrated X-MONITOR room correction, the algorithm is now better than ever.
Optimal Sound in Every Room
The mid-woofer-tweeter-mid-woofer design of the MTM MKII shapes controlled vertical dispersion, effectively minimising interaction with the acoustics of the room and other speakers and making this model ideal for spaces that haven't necessarily been set up for surround sound. Also, the addition of the Dolby Audio Room Design Tool (DARDT) fully simplifies the installation process by making sure that your monitor system meets Dolby's strict standards.
Compact & Versatile Design
iLoud MTM MKII monitors are 30% to 50% smaller and lighter than comparable studio monitors, making them easier to mount and position in virtually any studio space. These monitors can be mounted on a wall, suspended from the ceiling, or simply secured to any regular microphone stand, making them incredibly flexible. Meanwhile, the integrated LFE bass system expertly manages the lower frequencies, supporting a fully coherent immersive audio experience.
Service promise
Bax Music Warranty This product comes with a 3-year warranty.
This product comes with a 3-year warranty.
Reviews
Videos
Downloads
Other people also bought
-
5% OFF DEVINE STUDIO GEAR OVER £100! CODE: DEVINE5 PopularRecommended price £33 £24.95In stock Order now = receive it on Monday
-
PopularRecommended price £6.45 £4.73In stock Order now = receive it on Monday
-
5% OFF DEVINE STUDIO GEAR OVER £100! CODE: DEVINE5 Popular -25%Recommended price £57 £43In stock Order now = receive it on Monday
-
5% OFF DEVINE STUDIO GEAR OVER £100! CODE: DEVINE5 Popular -27%Recommended price £64 £47In stock Order now = receive it on Monday
Alternative products by other brands
Search all products in category Studio Monitor-
Bargain Buy -15%Recommended price £4,065 £3,439In stock Order now = receive it on Monday (free)
-
Bargain Buy -32%Recommended price £648 £439In stock Order now = receive it on Monday (free)
-
Popular -32%Recommended price £1,130 £766In stock Order now = receive it on Monday (free)
-
Bargain Buy -22%Recommended price £2,183 £1,699In stock Order now = receive it on Monday (free)