Devine SM100 - BAX Advised Acoustic Instrument Recording Bun

Devine SM100 - BAX Advised Acoustic Instrument Recording Bundle
Product no: 9000-0120-7879 Bax Music Warranty: Devine SM-100 Instrument Condenser Microphone This product comes with a 3-year warranty. Innox IVA 12 Microphone Stand (Black) This product comes with a manufacturing defects warranty. Devine SHM-10-BK Shockmount for Pencil and Overhead Microphones This product comes with a 3-year warranty. Devine MIC100/5 XLR Microphone/Signal Cable, 5m This product comes with a manufacturing defects warranty.

General

Want to record yourself playing guitar? Or flute? Or trumpet? Or violin perhaps? The BAX Advised Acoustic Instrument Recording Bundle includes almost everything you need: a Devine SM100 condenser instrument microphone, a straight microphone boom stand, a cable, a shock mount and a few other bits and bobs. All you need now is an audio interface or mixer and music software and you're ready to start recording.

Specifications

1x Devine SM-100 Instrument Condenser Microphone
The Devine SM-100 condenser instrument microphone is ideal for recording acoustic instruments such as guitars and pianos, but can also be used as an overhead. It comes with a microphone clip, a windscreen and a pouch.

Product features

Sustainable product	not specified
Microphone sensitivity (dBV/PA)	-38
Microphone impedance	100-149 ohms
Low-cut filter	no
Maximum SPL	130 dB - 139 dB
Maximum frequency	18 - 18.9 kHz
Microphone accessories	microphone clip, windshield, bag / box
Minimum frequency	30 - 34 Hz
Pad switch	no
Polar pattern	cardioid
Stereo	no
Interchangable capsules	no

Weight and dimensions including packaging

Weight (incl. packaging)	600 gr
Dimensions (incl. packaging)	20,5 x 10,0 x 7,5 cm

Product specifications

condenser instrument microphone
suited for the recording of acoustic instruments, overhead applications, etc.
pickup pattern: cardioid
frequency range: 30Hz - 18kHz
sensitivity: -38dB (+/-3dB), 0dB = 1V/Pa at 1kHz
output impedance: : 100 Ohm (+/- 30%) at 1kHz
self-noise: 24dBA
maximum sound pressure: 135dB (at 1kHz <1% THD)
S/N ratio: 70dB
phantom power supply: 9 - 52V
includes microphone clip, windscreen and carrying pouch

1x Innox IVA 12 Microphone Stand (Black)
The Innox IVA 12 is a solid, pro-grade microphone stand equipped with a large, ergonomic tightening knob that allows you to adjust the height of the stand while the three legs have been finished with rubber feet, keeping the whole thing nice and stable.

Product features

Number of stands	1
Sustainable product	not specified
Microphone stand weight	2 - 3 kg
Boom arm	yes
Height adjustable	yes
Colour	black
Stand material	steel
Maximum height of stand	200 to 210 cm
Included stand accessories	none
Mininum stand height	not specified
Screw thread size	5/8 inch
Set	no
Construction	2-part telescopic
Type of stand	boom stand
Type of stand base	flat base feet
Type of vlogging accessory	microphone stand / clip

Weight and dimensions including packaging

Weight (incl. packaging)	2,0 kg
Dimensions (incl. packaging)	87,0 x 11,0 x 8,0 cm

Product specifications

professional microphone stand
equipped with three stand legs with rubber feet
freely adjustable height
screw thread: 5/8-inch
freely adjustable boom arm length
vertical telescopic tube, ideal for overhead microphone setups
large, ergonomic tightening knobs
practical, collapsible construction
equipped with a practical cable management system
length when folded: 860mm
required floor surface when unfolded: 600mm
maximum height in overhead position: 2m

1x Devine SHM-10-BK Shockmount for Pencil and Overhead Microphones
With a slim 95mm diameter, the Devine SHM-10 is a super-compact and secure shockmount that limits contact noise and unwanted vibrational transfer, leaving you with clean audio recordings.

Product features

Sustainable product	not specified
Includes pop filter / cap	no
Compatible brand	universal
Shockmount for	small-diaphragm condenser microphone
Shock mount application	stand

Weight and dimensions including packaging

Weight (incl. packaging)	200 gr
Dimensions (incl. packaging)	12,0 x 12,0 x 9,0 cm

Product specifications

compact shockmount for pencil and overhead microphones
for pencil and overhead microphones
inner diameter: 25mm
diameter outer ring: 95mm
screw thread: 5/8"
colour: black

1x Devine MIC100/5 XLR Microphone/Signal Cable, 5m
Fitted with robust plugs and wrapped up inside a flexible yet durable outer shell, the Devine MIC100 is the ideal cable for optimally transferring any XLR audio signal from point A to point B. This is the 5-metre model.

Product features

(partially) coiled	no
Sustainable product	not specified
Right angled or straight	straight - straight
Colour	black
Length	5.00 m
Podcast bundle	no
Set	no
Audio connector	3-pin XLR
Accessory type	cable
Type of vlogging accessory	cable

Weight and dimensions including packaging

Weight (incl. packaging)	288 gr
Dimensions (incl. packaging)	22,5 x 22,0 x 2,0 cm

Product specifications

XLR male - XLR female
can be used as a microphone cable or as an all-round signal cable
supple, rugged cable
high-grade connectors with locking option
connectors with pull relief to retain contact integrity
length: 5m
filling: cotton
oxygen-free copper
isolation diameter: 1.4mm
isolation colours: red and white
number of conductors: 2
inner conductor diameter: 0.226mm²
conductor dimensions: 20 x 0.12mm
helical sheathing: 0.12 x 64
cable diameter: 6mm
sheathing material: flexible PVC
operating temperature: -20 - +70°C
capacity @ 1 kHz:
- cond.-cond.: 131pF/m
- cond.-shield.: 178pF/m

Write a review

Robbie December 3, 2024

Wrote the following about Devine MIC100/5 XLR Microphone/Signal Cable, 5m

Good cable, good price, will buy more when needed :)

Marciux October 8, 2023

Wrote the following about Devine MIC100/5 XLR Microphone/Signal Cable, 5m

All brilliant.. not a first buy from them .. happy customer

Simon D. July 13, 2022

Wrote the following about Devine SHM-10-BK Shockmount for Pencil and Overhead Microphones

Excellent value and good performance for the price. Some bump noise still gets to the microphone if you knock the stand. Also the shockmount is 5/8th inch thread and does not come with an adapter so if your stand has 3/8th inch thread, you will need to buy an adapter.

David T. February 20, 2021

Wrote the following about Devine MIC100/5 XLR Microphone/Signal Cable, 5m

Brilliant cable low noise and very good quality will be ordering more of these especially at these prices

David T February 17, 2021

Wrote the following about Devine MIC100/5 XLR Microphone/Signal Cable, 5m

Very good value for the money no noise will getting more of these

Matthew W. February 14, 2021