The Rode VideoMic MKII has enjoyed a little update to yield a big increase in the quality of your sound. The MKII version features a Rycote suspension, so there will be no more messing about with elastic bands!
Professional and complete, the Rode Lavalier II clip-on microphone features an omnidirectional polar pattern and a uniquely flat, low-profile design to ensure maximum discretion. Windshield, pop filter, and case included.
The Rode VXLR+ phantom power adapter is an ideal addition for products like the VideoMic. It converts XLR to mini jack and 12 - 48-volt phantom power to 3 - 5-volt plug-in power.
Rode's VideoMic Pro Rycote is the improved version of the VideoMic Pro. With its new, high-quality Rycote Lyre shock mount and more sensitive capsule.
The Rode Lavalier GO is an omni-directional lavalier microphone that works together perfectly with the Rode Wireless GO system. It also works with other devices that have a mini-jack connector.
Transform your Android phone into a fully-fledged, pocket-sized TV studio with the Rode Universal Vlogger Kit. This accessory pack raises the performance of the built-in mic and camera of your phone to a more professional level.
Transform your phone into a fully-fledged, pocket-sized TV studio with the Rode USB-C Vlogger Kit. This accessory pack raises the performance of the built-in mic of your phone, and your general setup, to a more professional level.
The Rode Thread Adapter actually combines three screw thread adapters into one. Fit it to your camera bag or key ring via the carabiner clip and you'll never have to deal with thread-incompatibility issues again.
Røde has included a Rycote shock mount with the Stereo Videomic Pro and equipped it with quieter capsules to keep handling noise to a minimum. What's more, it features a preamp that adds an extra 20dB gain.
With the Rode NTG-2 directional condenser microphone and a boom pole, you are provided with a perfect set for on-location recordings.
The Rode PodMic is a dynamic microphone designed for broadcasting. It's optimised for use with the RodeCaster mixer but works with other mixers as well.
The WS6 windshield is fit for the Rode NTG1 and NTG2 microphones. Thanks to the thick filling, the WS6 is fit for use in windy situations - it ensures that you are intelligible by keeping wind noise out.
The Rode M2 is a condenser microphone for live use. Its rugged housing protects it from falls and bumps. Thanks to a super-cardioid pickup pattern, it can be used in the studio for vocal and instrumental recordings.
This matched pair of Rode NT5 small-diaphragm condenser microphones can be set up to capture stunning stereo recordings in an X-Y, A-B, or ORTF configuration, or can be used for mono close-miking.
The Rode WS14 pop filter has been purpose-designed for the Rode PodMic and PodMic USB and counters the noise that comes with plosives like Ps and Fs.
This limited-time package deal consists of a Røde VideoMic Pro Rycote microphone and a free Dead Kitten windshield. Act fast! This offer is only valid while stocks last.
This limited-time package deal consists of a Røde NTG2 shotgun microphone and a free WS6 windshield. Act fast! This offer is only valid while stocks last.
This limited-time package deal consists of a Røde NTG4 shotgun microphone and a free WS6 windshield. Act fast! This offer is only valid while stocks last.
How do you mount the Rode Procaster dynamic radio microphone in such a way that you can adjust it in no time and without it taking up space on your desk? With the included PSA1 broadcast arm!
Now that the NT-USB microphone has reached a legendary status, RØDE launch the NT-USB+, seeking to go one step further with the addition of a built-in DSP and various other new functions.
Designed exclusively for smartphones, the Rode Wireless Micro system includes a single receiver that's simply plugged into the USB-C port port of your phone and paired with the two included clip-on microphones.
The Rode replacement mounting ring is compatible with the NT-USB microphone.
The Minifur-LAV windshields are delivered in a set of 3 and are made for Rode’s Lavalier tie-clip microphone.
The Rode PodMic is a dynamic microphone designed for broadcasting. It's optimised for use with the RodeCaster mixer (available separately) but works with other mixers as well.
Have you just invested in an audio interface or mixing console? Very nice! To make things easy for you, Bax has created some BAX-advised sets of microphones with the right accessories.
The Rode M2 is a cardioid condenser microphone suited for both the studio and the stage. The M3 has a wide range and a low signal noise ratio.
The NT55 set contains a matched pair of compact, balanced condenser microphones, fit for a variety of applications. It excels because of its wide dynamic range and complete frequency response.
The Rode NT5 condenser studio microphone has a highly focussed cardioid pickup pattern, making it cut out for capturing acoustic instruments, drums, wind instruments and percussion with maximum detail.
The Røde Dead Kitten wind shield is specifically designed for the iXY, Stereo VideoMic and NT4 microphones. It minimises ambient noise in extremely windy situations.
The Rode WSVM is used when your recording environment only suffers from a little bit of wind. It is also used to suppress loud sounds in speech.
The PSM1 is a shockmount for the Rode Procaster and the Podcaster.
Rode WS2 windscreen for the Rode K2, NTK, NT1-A, NT2-A, NT1000, NT2000, Procaster and Broadcaster.
The RM2 is a low-profile professional stand mount for the models including the Rode NT2-A, NT1000, NT2000, NTK, K2, Classic II & Broadcaster microphones.
The RM3 microphone holder is specifically designed for the various Rode microphones. It can be used for the M2, M3, NT3 and NT4.
The Rode K2 is a large-diaphragm tube microphone and has a number of unique properties, one of which is the unique, fully adjustable pickup pattern.
The name speaks for itself: the Rode Broadcaster is designed for radio applications that require a large frequency range and as little distortion as possible. This has made the Broadcaster the standard condenser microphone in the world of radio.
The Rode NTG1 shotgun microphone is specifically designed for the film, video, television, voice-over and production industry.
The Rode Procaster is a professional dynamic microphone, which is perfect for broadcasting thanks to its closed pickup pattern an specific frequency response.
Rode SM2 shock Mount for the Rode NT2A, NTK, K2, NT1000, NT2000 and the Classic 2.
The Rode NTG2 is a directional microphone that is specifically designed for film, video, TV, voice over and ENG applications. The main difference between the NTG2 and NTG1 is an internal battery.
The Rode Reporter microphone is suitable for indoor and outdoor use and is ideal for interviews. Its multi-layer grille acts as a filter and windshield and it features an omnidirectional capsule.
Rode's SM6 is a shockmount and pop shield in one. It is not only suited for Rode microphones, it also fits other brands.
Looking for a potent yet fuss-free wireless microphone system for vlogs, interviews and other content? Check out the Rode Wireless ME.
Easily expand your Rode Wireless microphone system with the Rode Wireless ME transmitter. Featuring an integrated microphone and rechargeable battery, this neat transmitter is compatible with Rode Wireless Go II and Wireless ME receivers.
The Rode NT2 A is a professional large-diaphragm capsule studio microphone with a switchable pickup pattern that can be used for all manner of studio recordings. It has three different settings: omni, cardioid and figure of 8.
Do you already own a Wireless Micro transmitter, and are actually looking for a nice reporter microphone? With this RØDE Interview Micro adapter, you can put that transmitter in the holder, put the plop cap on it, and you're done!
Equipped with both a USB-C and an XLR port, the Rode Podmic USB supports a fuss-free, direct link-up with a computer as well as more extensive set-ups that include a mixer or audio interface.
Do you ever make outdoor recordings under difficult circumstances? In that case, you should use this Rode WS8 Deluxe Windshield to prevent wind noise from being picked up.
Filters