Warm Audio WA-87jr SE Black microphone set

Warm Audio WA-87jr SE Black microphone set
Product no: 9000-0154-3252 Bax Music Warranty: Warm Audio WA-87jr SE Black large-diaphragm condenser microphone This product comes with a 5 year warranty when you register it with warmaudio.com/product-registration. If the product is not registered it has a 3-year warranty. Devine SPS 100 Pop Filter This product comes with a manufacturing defects warranty. Devine MIC500N/3 XLR Microphone and Signal Cable with Neutrik Connectors, 3m This product comes with a 3-year warranty. Devine PRO 2000 Studio Headphones This product comes with a 3-year warranty. Innox IVA 06 Desktop Microphone Stand This product comes with a 3-year warranty.

General

The 87 is a microphone family that everyone, with some studio experience, knows. Pricey, but rock solid and highly popular. The Warm Audio WA-87jr is a considerably cheaper alternative, and still a fantastic studio microphone. But for those who need to watch their bank account even within this range, there is also this Warm Audio WA-87jr SE. Basically much the same product, but with things that aren't there! There is only a cardioid directional characteristic, but that will be enough for most. Also, the pad switch and highpass switch are omitted, and internally some of the components are different. If those are things you can do without, then this SE is a particularly attractively priced 87 alternative! Because let's not forget that 'tis just a very good microphone.

Specifications

1x Warm Audio WA-87jr SE Black large-diaphragm condenser microphone
The Warm Audio WA-87jr SE is largely comparable to the regular WA-87jr, but lacks a few things. This is offset by a razor-sharp price.

Product features

Tube microphone	no
Sustainable product	not specified
Microphone sensitivity (dBV/PA)	-37
Microphone impedance	100-149 ohms
Microphone sound	clean/neutral
Low-cut filter	no
Maximum SPL	120 dB - 129 dB
Maximum frequency	20 - 20.9 kHz
Microphone accessories	shock mount, bag / box
Minimum frequency	20 - 21 Hz
Multi-pattern	no
Pad switch	no
Polar pattern	cardioid
Stereo	no
Vintage microphone family	87

Weight and dimensions including packaging

Weight (incl. packaging)	935 gr
Dimensions (incl. packaging)	31,0 x 13,5 x 9,5 cm

1x Devine SPS 100 Pop Filter
The SPS 100 pop filter is universal and can be clamped to any microphone stand. It makes plosive and hissing sounds sound softer and more natural in your recording. Ideal for home studio applications.

Product features

Pop filter mount	goose neck with stand mount
Sustainable product	not specified
Filter material	nylon
Podcast bundle	no
Accessory type	popfilter
Type of vlogging accessory	pop filter

Weight and dimensions including packaging

Weight (incl. packaging)	200 gr
Dimensions (incl. packaging)	37,5 x 19,0 x 6,0 cm

Product specifications

- pop filter with acoustic nylon
- shields the microphone from blasts of air that might cause auxiliary noises to end up in your recording
- acoustic nylon lets the intended sound through
- equipped with microphone stand clamp that can be mounted onto the beam
- microphone clamp with spring, can be tightened with a screw mechanism for optimal stability
- designed for condenser vocal microphones, but can also be used with dynamic vocal microphones

1x Devine MIC500N/3 XLR Microphone and Signal Cable with Neutrik Connectors, 3m
Every Devine MIC500 Series cable comes finished with a pair of strain-relief Neutrik plugs that have been specifically designed to retain contact integrity. This 3-metre-long problem-solver can take on pretty much any audio signal.

Product features

Sustainable product	not specified
Audio connector	3-pin XLR
Length	3.00 m
Colour	black
Set	no
(partially) coiled	no
Right angled or straight	straight - straight

Weight and dimensions including packaging

Weight (incl. packaging)	215 gr
Dimensions (incl. packaging)	22,0 x 19,0 x 3,0 cm

Product specifications

XLR male - XLR female
can be used as a microphone cable or as an all-round signal cable
flexible, strong cable
Neutrik connectors, NC3MXX and NC3FXX
connectors with pull relief to retain contact integrity
length: 3m
filling: cotton
oxygen-free copper
isolation diameter: 1.4mm
isolation colours: red and white
number of conductors: 2
inner conductor diameter: 0.226mm²
conductor dimensions: 20 x 0.12mm
helical sheathing: 0.12 x 64
cable diameter: 6mm
sheathing material: flexible PVC
operating temperature: -20 - +70°C
capacity @ 1 kHz:
- cond.-cond.: 131pF/m
- cond.-shield.: 178pF/m

1x Devine PRO 2000 Studio Headphones
Built for both professional and casual listening, the Devine PRO 2000 headphones come with some solid specifications: efficient drivers, low impedance, exceptional comfort and a generous price-tag.

Product features

Active noise suppression	no
Wireless	no
Rotatable earpad	no
Sustainable product	not specified
Headphone weight	not specified
Headphone construction	closed
Ideal headphones for	studio
Headphone impedance	30-39 ohms
In/on/over ear	over-ear
Includes microphone	no
Design can be folded/dismantled	no
Adjustable bass boost	no
Removable cable	no
Cable length	> / = 300 cm
Colour	black
Maximum frequency	22 - 22.9 kHz
Minimum frequency	15 - 17 Hz
Podcast bundle	no
Audio connector	jack 3.5 mm TRS, jack 6.3 mm TRS
Accessory type	headphones
Headphone design	modern
Volume control	no

Weight and dimensions including packaging

Weight (incl. packaging)	400 gr
Dimensions (incl. packaging)	22,5 x 19,0 x 10,0 cm

Product specifications

studio headphones
closed construction
folding design
swivel mechanism per earpiece
padded ear cushions and headband
adjustable headband (max. 35mm per side)
soft ear pads, made of synthetic leather
driver diameter: 40mm
frequency range: 15Hz - 22kHz
impedance: 32 Ohms
sensitivity: 95dB (+/- 3dB)
maximum input power: 400 mW
cord length: 3m (straight)
connector: 3.5mm mini-jack (6.3mm jack adapter included)

1x Innox IVA 06 Desktop Microphone Stand
The highly useful IVA 06 desktop microphone stand is compatible with studio as well dynamic microphones and comes fitted with a heavy, stabilising metal base, a height-adjustable support, and comes including a screw-thread adapter.

Product features

Number of stands	1
Sustainable product	not specified
Microphone stand weight	0 - 1 kg
Boom arm	no
Height adjustable	yes
Colour	black
Stand material	steel
Maximum height of stand	< 50 cm
Included stand accessories	none
Mininum stand height	10 to 15 cm
Podcast bundle	no
Screw thread size	3/8 inch, 5/8 inch
Set	no
Construction	2-part telescopic
Accessory type	microphone stand
Type of stand	tabletop stand/tripod
Type of stand base	base plate
Type of vlogging accessory	microphone stand / clip

Weight and dimensions including packaging

Weight (incl. packaging)	600 gr
Dimensions (incl. packaging)	18,5 x 15,5 x 3,5 cm

Product specifications

desktop microphone stand
height: 145 to 230mm
stable, metal base
base finished with rubber pads for improved grip and to prevent scratching
microphone clip adapter included (⅜ inch to ⅝ inch)

Write a review

Ruslan Munteanu September 28, 2025

Wrote the following about Devine MIC500N/3 XLR Microphone and Signal Cable with Neutrik Connectors, 3m

I buy this cable 1 year ago and I use couple times an still not working

Brian John Ainsworth April 16, 2021